[Fwd: Re: [PlanetCCRMA] ALSA 1.0.8 Feedback]

[Saul Lethbridge]

No its not working - that's the strange thing. Everything looks good!

>From: Fernando Lopez-Lezcano <nando@ccrma.Stanford.EDU>
>To: Saul Lethbridge <saul_lethbridge@hotmail.com>
>CC: planetccrma@ccrma.Stanford.EDU
>Subject: Re: [Fwd: Re: [PlanetCCRMA] ALSA 1.0.8 Feedback]
>Date: 19 Jan 2005 15:56:12 -0800
>
>On Wed, 2005-01-19 at 14:01, Saul Lethbridge wrote:
> > Please see me previous post for further information (it has dmesg,
> > /var/log/messages etc)
>
> >  /sbin/depmod -a
> > [root@localhost saul]# /etc/rc.d/init.d/alsasound start
> > Starting sound driver snd-darla20                          [  OK  
]
> > Starting sequencer                                         [  OK  
]
> > Restoring sound driver settings /usr/sbin/alsactl: 
load_state:1134: No
> > soundcards found...
> >                                                            
[FAILED]
> > dmesg gets:
> > Realtime LSM initialized (all groups, mlock=1)
> > ALSA
> > 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio.c:1813:
> > Echoau dio driver starting...
> > ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 5 (level, low) -> 
IRQ 5
> > ALSA
> > 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio.c:1736:
> > chip=e 0fa8014
> > ALSA
> > 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio.c:1762:
> > pci=e7 ec8000 irq=5 subdev=0010 Init hardware...
> > ALSA
> > 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/darla20_dsp.c:35:
> > init_h w() - Darla20
> > ALSA 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio.c:38:
> > firmware  requested: darla20_dsp.fw
> > ALSA
> > 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio_dsp.c:393:
> > loa d_dsp: Set bad_board to TRUE
> > ALSA
> > 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio_dsp.c:186:
> > Rea d serial number 00445231 00313037 00303630 00000224 0000bef7
> > ALSA
> > 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio_dsp.c:508:
> > loa d_dsp: OK!
> > ALSA 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio.c:48:
> > firmware  released
> > ALSA
> > 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio_dsp.c:717:
> > res tore_dsp_settings
> > ALSA
> > 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio_dsp.c:759:
> > res tore_dsp_rettings done
> > ALSA
> > 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio_dsp.c:1024:
> > in it_line_levels
> > ALSA
> > 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/darla20_dsp.c:64:
> > init_h w done
> > ALSA
> > 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio.c:1781:
> > Card i nit OK
> > ALSA 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio.c:840:
> > Analog PCM ok
> > ALSA
> > 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio.c:1932:
> > Card r egistered: Darla20 rev.0 (DSP56301) at 0xdffe0000 irq 5
>
>So? Is the card working? It looks like everything loaded and there are
>not errors or warnings... I think there is some more specific mixer
>you can use for these cards, called echomixer, I think (part of
>alsa-tools)
>
>-- Fernand
>
>

_________________________________________________________________
Need a credit card fast? Apply online now! Must be over 18 and AU only:   
http://ad.au.doubleclick.net/clk;11046970;10638934;f?http://www.anz.com/aus/promo/first1004ninemsn/default.asp