[PlanetCCRMA] M-Audio Delta 1010 LT

Nicholas Manojlovic nicholasmanojlovic at gmail.com
Thu Jan 31 01:46:01 PST 2008


how do you use MIDI with envy24control?

very interesting

nm

On Jan 31, 2008 12:17 AM, Roy Vestal <rvestal at trilug.org> wrote:

> I don't know about the Delta 1010LT so I can't help you with the jumper
> settings. I have the rackmount Delta 1010.
>
> I'm not in front of my audio workstation atm (day job) :~(
> What I do for EnvyControl24, I go to the 3rd tab (Patchbay i think) and
> change the output from PCM to the channel of the output.
>
> I have an older EV 1642 sound board that has direct in/outs on each
> channel. I use a TRS to stereo cable so my returns are on the same
> channel as my sends. In my case, I simply change the PCM setting to the
> channel hardware setting. You can then go to the 1st tab (again, I don't
> remember the exact name) and link the stereo controls (Link tab at the
> bottom) and control mute and output there, just as if it were hardware.
> I also have a BCF2000 midi control surface, so I can assign the channel
> to a slider if needed.
>
> HTH
>
> pyrael wrote:
> >
> > kelly-9 wrote:
> >
> >> don't forget about the jumpers on the board that set the atenuation on
> the
> >> balanced ins. you don't want to blow out the pres on these. but yea,
> going
> >> since fc3 with this board and a mackie mixer. haven't had a glitch in a
> >> long while. for real time csound you can get some short buffers and
> >> ardour/jack work fine here.
> >>
> >> k.
> >>
> >>
> >
> > I was told but a guy at another forum about those jumpers. He said he
> > disables the pres (jumper?) and uses external pres. I'd assume there is
> more
> > to it than just not wanting to blow them, I'd assume he uses externals
> for
> > better sound or something. good to know, thanks for the info
> >
> > Pyrael
> >
> >
>
> _______________________________________________
> PlanetCCRMA mailing list
> PlanetCCRMA at ccrma.stanford.edu
> http://ccrma-mail.stanford.edu/mailman/listinfo/planetccrma
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://cm-mail.stanford.edu/pipermail/planetccrma/attachments/20080131/3f6b410f/attachment.html>


More information about the PlanetCCRMA mailing list