[PlanetCCRMA] nvidia missing 3d

[marcelo schultes]

>From: Rick B <zajelo3@cfl.rr.com>
>To: marcelo schultes <schultex@hotmail.com>
>CC: planetccrma@ccrma.Stanford.EDU
>Subject: Re: [PlanetCCRMA] nvidia missing 3d
>Date: Wed, 26 Jan 2005 12:30:59 -0500
>
>marcelo schultes wrote:
>
>>Hi ccrma users
>>I've just built and installed nvidia drivers without any trouble.
>>Edited XF86Config file as always, but it can't  run any 3d stuff
>>here's what it say when i try tuxracer, i'm on rh9 - ccrma-kernel 2.4.26:
>>
>>[schultex@cm-net-poa-c8b016fc schultex]$ tuxracer
>>Tux Racer 0.61 -- a Sunspire Studios Production 
>>(http://www.sunspirestudios.com)
>>(c) 1999-2000 Jasmin F. Patry <jfpatry@sunspirestudios.com>
>>"Tux Racer" is a trademark of Jasmin F. Patry
>>Tux Racer comes with ABSOLUTELY NO WARRANTY. This is free software,
>>and you are welcome to redistribute it under certain conditions.
>>See http://www.gnu.org/copyleft/gpl.html for details.
>>
>>Xlib:  extension "GLX" missing on display ":0.0".
>>Xlib:  extension "GLX" missing on display ":0.0".
>>*** tuxracer error: Couldn't initialize video: Couldn't find matching GLX 
>>visual
>>(Success)
>>
>>
>>any help will be usefull.
>>Cheers
>>Marcelo
>>
>>_________________________________________________________________
>>MSN Messenger: converse online com seus amigos .  
>>http://messenger.msn.com.br
>>
>>_______________________________________________
>>PlanetCCRMA mailing list
>>PlanetCCRMA@ccrma.stanford.edu
>>http://ccrma-mail.stanford.edu/mailman/listinfo/planetccrma
>>
>    Which Nvidia driver? Which Nvidia card? I've had problems with the 
>newer Nvidia driver on my Ti4600 so I stay back at the 6111 driver. On FC1 
>I had to install the 5328 driver first and then upgrade to the 6111 driver 
>to get it to work though. On FC2 I can install 6111 without first 
>installing 5328. The newest driver (6629?) I can't get to work unless I 
>patch it, so I'm just staying at 6111 for right now.
>
>                        Rick B


I have downgraded the driver to 6111 version, but everything still the same, 
it installs and load fine, but no 3d at all. There's a curiosity, the nv 
installer tells me that the kernel has an option to load rivafb driver as a 
module, wich would conflict with the new driver, but I'm shure this module 
is not loaded. Again, any help is apreciated.
here the modules i have on this machine
[schultex@cm-virtua-poa-c8b0f051 schultex]$ /sbin/lsmod
Module                  Size  Used by    Tainted: P
nvidia               4767212   4 (autoclean)
agpgart                56580   3 (autoclean)
lp                      8900   0 (autoclean)
parport                37184   0 (autoclean) [lp]
snd-seq-midi            5152   0 (unused)
snd-seq-midi-event      6304   0 [snd-seq-midi]
snd-seq                49968   0 [snd-seq-midi snd-seq-midi-event]
snd-ice1712            54692   0
snd-ice17xx-ak4xxx      2760   0 [snd-ice1712]
snd-ac97-codec         63464   0 [snd-ice1712]
snd-mpu401-uart         5680   0 [snd-ice1712]
snd-rawmidi            19808   0 [snd-seq-midi snd-mpu401-uart]
snd-seq-device          6268   0 [snd-seq-midi snd-seq snd-rawmidi]
snd-cs8427              9352   0 [snd-ice1712]
snd-pcm                86144   0 [snd-ice1712]
snd-timer              21220   0 [snd-seq snd-pcm]
snd-page-alloc          9336   0 [snd-pcm]
snd-i2c                 4660   0 [snd-ice1712 snd-cs8427]
snd-ak4xxx-adda         5680   0 [snd-ice1712 snd-ice17xx-ak4xxx]
snd                    49156   0 [snd-seq-midi snd-seq-midi-event snd-seq 
snd-ice1712 snd-ac97-codec snd-mpu401-uart snd-rawmidi snd-seq-device 
snd-cs8427 snd-pcm snd-timer snd-i2c snd-ak4xxx-adda]
soundcore               6692   2 [snd]
autofs                 13812   0 (autoclean) (unused)
forcedeth              12012   1
ipt_REJECT              4344   6 (autoclean)
iptable_filter          2444   1 (autoclean)
ip_tables              15776   2 [ipt_REJECT iptable_filter]
sg                     37132   0 (autoclean)
sr_mod                 17944   0 (autoclean)
ide-scsi               12080   0
scsi_mod              109144   3 [sg sr_mod ide-scsi]
ide-cd                 35840   0
cdrom                  33568   0 [sr_mod ide-cd]
printer                 9952   0
keybdev                 3104   0 (unused)
mousedev                5556   1
hid                    24868   0 (unused)
input                   5760   0 [keybdev mousedev hid]
ehci-hcd               21544   0 (unused)
usb-ohci               22248   0 (unused)
usbcore                80928   1 [printer hid ehci-hcd usb-ohci]
ext3                   73252   2
jbd                    54324   2 [ext3]

See you
Marcelo

_________________________________________________________________
MSN Messenger: converse online com seus amigos .  
http://messenger.msn.com.br