[PlanetCCRMA] Sysex utility?

[Frank van de Pol]

On Mon, Jun 14, 2004 at 04:29:53PM -0500, Jason Balicki wrote:
> > Are you sure cat system > /dev/sequencer works? The OSS /dev/sequencer
> 
> No, not really.  Now that I think about it, I'm pretty sure I used
> a /dev/midixx device to upgrade my Vetta, but that was back when I was just
> using oss devices.  I *did* try using /dev/midiXX this time, but I don't
> think those are the right ones.  (This is my first experience with ALSA...
> forgive me. :/ )  I'll experiment with the /dev/snd devices tonight and
> see what I come up with.
> 
> I've got three MIDI interfaces (a usb 1x1, a keystation controller
> and the soundcards joystick/midi port).  Is there a shortcut to
> finding which device is connected to which port (/dev/ wise)?
> I would assume that I would need to shut down JACK in order
> to do this as well, correct?  Otherwise JACK is going to have a
> lock on the port.  Or am I getting it totally wrong?
> 

OK, judging from your '/dev/sequecer' presumed you were an user of the oss
stuff.

in this case you might be lucky: try the amidi utility:

"amidi -l" will list all your hardware ports

"amidi -p hw:0,0 -s file.syx" will send the file to your first port on your
first card (use the amidi -l)

Hope this is of use;

Frank.

-- 
+---- --- -- -  -   -    -
| Frank van de Pol                  -o)    A-L-S-A
| FvdPol at coil.demon.nl              /\\  Sounds good!
| http://www.alsa-project.org      _\_v
| Linux - Why use Windows if we have doors available?