[PlanetCCRMA] CCRMA/Fedora in VMWare on a MacBook Pro

[Donald Steven]

The jack connections are very simple: only hydrogen outputs are 
connected to system inputs.  Nothing else on any jack configuration tab 
is connected.  The problem occurs with every jack-connected piece of 
software, for example zynaddsubfx.

Don

On 02/13/2012 02:14 PM, Julius Smith wrote:
> I'm not at a Linux machine right now, so I can't verify the exact 
> wording used, but I mean "system inputs" or "capture inputs", as 
> opposed to "playback inputs" for JACK.  In other words, disconnect 
> your external microphone and any other "audio listener" from JACK. - jos
>
> At 11:04 AM 2/13/2012, Donald Steven wrote:
>> That would make sense, but I don't really understand.  If I 
>> disconnect the inputs, how will I get any sound?
>>
>> Don
>>
>> On 2/13/2012 2:03 PM, Julius Smith wrote:
>>> It sounds like JACK's inputs are hooked up to the output bus, or 
>>> something like that.  I would disconnect the JACK inputs, etc. - jos
>>>
>>> At 05:53 AM 2/13/2012, Donald Steven wrote:
>>>> I installed Fedora 13 in WMWare on a MacBook Pro.  The sound is 
>>>> working:
>>>> for example, on YouTube and csound.  However, if I use jack, say with
>>>> Hydrogen Drumkits, I get an echo.  Each single drum hit 'sounds' but
>>>> echoes multiple times at less and less amplitude before 'running out'
>>>> after about six or seven repeats.  Anyone have an ideas?
>>>>
>>>> Do
>>>>
>>>> _______________________________________________
>>>> PlanetCCRMA mailing list
>>>> PlanetCCRMA at ccrma.stanford.edu
>>>> http://ccrma-mail.stanford.edu/mailman/listinfo/planetccrma
>>>
>>>
>>> Julius O. Smith III <jos at ccrma.stanford.edu>
>>> Prof. of Music and Assoc. Prof. (by courtesy) of Electrical Engineering
>>> CCRMA, Stanford University
>>> http://ccrma.stanford.edu/~jos/
>
>
> Julius O. Smith III <jos at ccrma.stanford.edu>
> Prof. of Music and Assoc. Prof. (by courtesy) of Electrical Engineering
> CCRMA, Stanford University
> http://ccrma.stanford.edu/~jos/