[PlanetCCRMA] Cannot load Tascam US122L firmware

[Derek Pidhirnyj]

Hi all,

I recently purchased a Tascam US-122L interface and cannot get my CCRMA 
FC4 setup to load the1st stage firmware.
I get the following error when trying to load the 1st stage fw:

fxload -s usx2y-fw-0.1b/ld2-ezusb.hex -I 
alsa-firmware-1.0.13/usx2yloader/us122fw.ihx  -D /proc/bus/usb/002/002
*can't modify CPUCS: Broken pipe*

Searching the web I see that the 1st stage fw changes the Tascam with 
vendor ID of 1604 and a product ID of 8006 to product ID 8007,
which is what the device driver is looking for. As you can see the 
vendor ID and product ID of my Tascam are totally different.

# lsusb
Bus 002 Device 002: ID 0644:800e TEAC Corp.
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 002: ID 046d:c016 Logitech, Inc. M-UV69a Optical Wheel Mouse
Bus 001 Device 001: ID 0000:0000

Any ideas ?

Cheers, dpids


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://cm-mail.stanford.edu/pipermail/planetccrma/attachments/20070101/3a15ca79/attachment.html>