[PlanetCCRMA] jackd and two Delta1010 cards
Bob Wilkinson
wilkinson.bob@comcast.net
Tue Jul 11 22:18:00 2006
--NextPart_Webmail_9m3u9jl4l_2505_1152664409_0
Content-Type: text/plain
Content-Transfer-Encoding: 8bit
Let me say it this way - the setup for qjackctl either had options in it to use hw:0 hw:0,0 hw:1 etc but not multi_capture. So, because I could not get the setup to find the multi_capture device, I had to start from command line.
If there's a way around that, again - this is more tuning and tweaking that I planned on finding in the future, but will gladly take advice from now.
-------------- Original message --------------
From: "Rui Nuno Capela" <rncbc@rncbc.org>
> On Tue, July 11, 2006 02:53, Bob Wilkinson wrote:
> > ...
> > (8) Start the JACK daemon by command line "jackd -d ALSA -C
> > *input_name_here* -P *playback_name_here*
> > (9) Control of JACK can now be done using qjackctl (NOT start - it must
> > be done by command line), and all other programs just work.
> >
>
> Why you say qjackctl cannot start jackd as it should? Can you give us some
> evidence?
>
> Bye now.
> --
> rncbc aka Rui Nuno Capela
> rncbc@rncbc.org
>
> _______________________________________________
> PlanetCCRMA mailing list
> PlanetCCRMA@ccrma.stanford.edu
> http://ccrma-mail.stanford.edu/mailman/listinfo/planetccrma
--NextPart_Webmail_9m3u9jl4l_2505_1152664409_0
Content-Type: text/html
Content-Transfer-Encoding: 8bit
<html><body>
<DIV>Let me say it this way - the setup for qjackctl either had options in it to use hw:0 hw:0,0 hw:1 etc but not multi_capture. So, because I could not get the setup to find the multi_capture device, I had to start from command line.</DIV>
<DIV> </DIV>
<DIV>If there's a way around that, again - this is more tuning and tweaking that I planned on finding in the future, but will gladly take advice from now.</DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV> </DIV>
<BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">-------------- Original message -------------- <BR>From: "Rui Nuno Capela" <rncbc@rncbc.org> <BR><BR>> On Tue, July 11, 2006 02:53, Bob Wilkinson wrote: <BR>> > ... <BR>> > (8) Start the JACK daemon by command line "jackd -d ALSA -C <BR>> > *input_name_here* -P *playback_name_here* <BR>> > (9) Control of JACK can now be done using qjackctl (NOT start - it must <BR>> > be done by command line), and all other programs just work. <BR>> > <BR>> <BR>> Why you say qjackctl cannot start jackd as it should? Can you give us some <BR>> evidence? <BR>> <BR>> Bye now. <BR>> -- <BR>> rncbc aka Rui Nuno Capela <BR>> rncbc@rncbc.org <BR>> <BR>> _______________________________________________ <BR>> PlanetCCRMA mailing list <BR>> PlanetCCRMA@ccrma.stanford.edu <BR>> http://ccrma-mail.stanford.edu/mailman/listinfo/planetccrma </BL
OCKQUOTE></body></html>
--NextPart_Webmail_9m3u9jl4l_2505_1152664409_0--