[PlanetCCRMA] More No Sound

Tue Jan 3 14:16:41 2006

This is a multi-part message in MIME format.

------_=_NextPart_001_01C60AFB.3C233C1D
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Hi,

Sound card priority---solved, I think. I guess the order that they =
appear in modprobe.conf does matter regardless of the cards 0 or 1 =
identity. However, still no sound from 2.6.10-2.1.ll.rhfc3.ccrma on my =
P4 with SB Live 7.1 card. Again, my previous installation of Planet =
could play soundfiles just fine, so I'm not sure what is going on with =
this fresh install. Here are some of the errors I'm getting:

When trying to play a soundfile with aplay, I get this:

[greg@ip-61 ~]$ aplay voice.wav=20
Playing WAVE 'voice.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, =
Mono
aplay: set_params:862: Channels count non available

>From within xmms, I get this back in the shell:

** WARNING **: alsa_setup_mixer(): Failed to find mixer element: PCM
Message: fmt 5, channels: 2

...and xmms hangs.

When trying to play a simple sound file from within snd, the listener =
reports the following:

;alsa_audio_open: hw:0,0: could not set rate to exactly 44100, set to =
48000 instead
;recover_from_xrun: [under|over]run detected
;recover_from_xrun: [under|over]run detected
...
...

named fails to start as well (odd, had never had a problem with that =
either...), but getting audio sorted out is my first concern. Any help =
would be great. Thanks

Greg

------_=_NextPart_001_01C60AFB.3C233C1D
Content-Type: text/html;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Diso-8859-1">
<META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version =
6.5.7638.1">
<TITLE>More No Sound</TITLE>
</HEAD>
<BODY>
<!-- Converted from text/plain format -->
<BR>

<P><FONT SIZE=3D2>Hi,<BR>
<BR>
Sound card priority---solved, I think. I guess the order that they =
appear in modprobe.conf does matter regardless of the cards 0 or 1 =
identity. However, still no sound from 2.6.10-2.1.ll.rhfc3.ccrma on my =
P4 with SB Live 7.1 card. Again, my previous installation of Planet =
could play soundfiles just fine, so I'm not sure what is going on with =
this fresh install. Here are some of the errors I'm getting:<BR>
<BR>
When trying to play a soundfile with aplay, I get this:<BR>
<BR>
[greg@ip-61 ~]$ aplay voice.wav<BR>
Playing WAVE 'voice.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, =
Mono<BR>
aplay: set_params:862: Channels count non available<BR>
<BR>
>From within xmms, I get this back in the shell:<BR>
<BR>
** WARNING **: alsa_setup_mixer(): Failed to find mixer element: PCM<BR>
Message: fmt 5, channels: 2<BR>
<BR>
...and xmms hangs.<BR>
<BR>
When trying to play a simple sound file from within snd, the listener =
reports the following:<BR>
<BR>
;alsa_audio_open: hw:0,0: could not set rate to exactly 44100, set to =
48000 instead<BR>
;recover_from_xrun: [under|over]run detected<BR>
;recover_from_xrun: [under|over]run detected<BR>
...<BR>
...<BR>
<BR>
named fails to start as well (odd, had never had a problem with that =
either...), but getting audio sorted out is my first concern. Any help =
would be great. Thanks<BR>
<BR>
Greg<BR>
</FONT>
</P>

</BODY>
</HTML>
------_=_NextPart_001_01C60AFB.3C233C1D--