[PlanetCCRMA] Problems with midiman Oxygen8 under FC3

[Peter Howard]

On Thu, 2005-03-10 at 18:33 -0800, Fernando Lopez-Lezcano wrote:
> On Thu, 2005-03-10 at 17:32, Peter Howard wrote:
> > This was working under FC2.  But after reinstalling the firmware loader
> > for FC3 I get the following trace in /var/log/messages
> > 
> > Mar 11 12:27:51 wagner /etc/hotplug/usb/midisport_fw:
> > load /usr/share/usb/midisport/MidiSportKS.ihx for 763/1014/1
> > to /proc/bus/usb/003/011
> > Mar 11 12:27:56 wagner kernel: usb 3-2: USB disconnect, address 11
> > Mar 11 12:27:57 wagner kernel: usb 3-2: new full speed USB device using
> > uhci_hcd and address 12
> > 
> > 
> > I.e. there is a disconnect and immediate reconnect after loading the
> > firmware.
> 
> I think this is normal (from what I remember). The usb device becomes a
> different device after the firmware load, so it disconnects and
> reconnects again with a different "personality" (which should now behave
> as a normal midi device). 


You are correct.  'DOH  What threw me here is that JACK doesn't seem to
pick it up if the keyboard is plugged in after JACK is started.  I don't
remember that behaviour from FC2.  Anyway, as long as JACK is started
afterwards, it all works.

Thanks.
 
> -- Fernando
> 
> 
> _______________________________________________
> PlanetCCRMA mailing list
> PlanetCCRMA at ccrma.stanford.edu
> http://ccrma-mail.stanford.edu/mailman/listinfo/planetccrma
-- 
Peter Howard <pjh at coastal.net.au>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
URL: <https://cm-mail.stanford.edu/pipermail/planetccrma/attachments/20050310/88e68279/attachment.sig>