[PlanetCCRMA] RE: Edirol UA-25 not recognized by software

[Antonio Enriquez]

[root@ml ~]# cat /proc/asound/cards
0 [I82801CAICH3   ]: ICH - Intel 82801CA-ICH3
                     Intel 82801CA-ICH3 with CS4205 at 0xd800, irq 5
1 [Modem          ]: ICH-MODEM - Intel 82801CA-ICH3 Modem
                     Intel 82801CA-ICH3 Modem at 0xd400, irq 5
2 [UA25           ]: USB-Audio - UA-25
                     EDIROL UA-25 at usb-0000:00:1d.0-1, full speed


When I use qjackctl, under setup > Interface,  I have options to use
hw:0 or hw:1.  I'm guessing that hw:2 should be the UA-25, but it's
not in the menu.  Is the setup > Interface option where I set which
device to record audio from?


Antonio

[root@ml ~]# ls -al /proc/asound/card2/
total 0
dr-xr-xr-x  4 root root 0 Jan 29 11:08 .
dr-xr-xr-x  7 root root 0 Jan 29 11:08 ..
-r--r--r--  1 root root 0 Jan 29 11:08 id
-r--r--r--  1 root root 0 Jan 29 11:08 midi0
-rw-r--r--  1 root root 0 Jan 29 11:08 oss_mixer
dr-xr-xr-x  3 root root 0 Jan 29 11:08 pcm0c
dr-xr-xr-x  3 root root 0 Jan 29 11:08 pcm0p
-r--r--r--  1 root root 0 Jan 29 11:08 stream0
-r--r--r--  1 root root 0 Jan 29 11:08 usbbus
-r--r--r--  1 root root 0 Jan 29 11:08 usbid




> Which is the output of
> 
> cat /proc/asound/cards
> cat /proc/asound/card0
> cat /proc/asound/card1
> 
> ?
> 
> If you can see there the audio/midi devices provided by the UA-25, there
> should be no problem at all.
> 
> Good luck,
> 
> Luis
> 
> _______________________________________________
> PlanetCCRMA mailing list
> PlanetCCRMA@ccrma.stanford.edu
> http://ccrma-mail.stanford.edu/mailman/listinfo/planetccrma
>