[Fwd: Re: [PlanetCCRMA] ALSA 1.0.8 Feedback]

[Saul Lethbridge]

By the way Fernando how did you know that my Darla was detected as a 
video device? It was!

/sbin/depmod -a
[root at localhost saul]# /etc/rc.d/init.d/alsasound start
Starting sound driver snd-darla20                          [  OK  ]
Starting sequencer                                         [  OK  ]
Restoring sound driver settings /usr/sbin/alsactl: load_state:1134: No 
soundcards found...
                                                          [FAILED]
dmesg gets:
Realtime LSM initialized (all groups, mlock=1)
ALSA 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio.c:1813: 
Echoau dio driver starting...
ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 5 (level, low) -> IRQ 5
ALSA 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio.c:1736: 
chip=e 0fa8014
ALSA 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio.c:1762: 
pci=e7 ec8000 irq=5 subdev=0010 Init hardware...
ALSA 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/darla20_dsp.c:35: 
init_h w() - Darla20
ALSA /usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio.c:38: 
firmware  requested: darla20_dsp.fw
ALSA 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio_dsp.c:393: 
loa d_dsp: Set bad_board to TRUE
ALSA 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio_dsp.c:186: 
Rea d serial number 00445231 00313037 00303630 00000224 0000bef7
ALSA 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio_dsp.c:508: 
loa d_dsp: OK!
ALSA /usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio.c:48: 
firmware  released
ALSA 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio_dsp.c:717: 
res tore_dsp_settings
ALSA 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio_dsp.c:759: 
res tore_dsp_rettings done
ALSA 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio_dsp.c:1024: 
in it_line_levels
ALSA 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/darla20_dsp.c:64: 
init_h w done
ALSA 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio.c:1781: 
Card i nit OK
ALSA /usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio.c:840: 
Analog PCM ok
ALSA 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio.c:1932: 
Card r egistered: Darla20 rev.0 (DSP56301) at 0xdffe0000 irq 5


This is from var/log/messages:

Jan 19 18:59:32 localhost kernel: ALSA 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio.c:1813: 
Echoaudio driver starting...
Jan 19 18:59:32 localhost kernel: ACPI: PCI interrupt 0000:00:08.0[A] -> 
GSI 5 (level, low) -> IRQ 5
Jan 19 18:59:32 localhost kernel: ALSA 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio.c:1736: 
chip=e0fa8014
Jan 19 18:59:32 localhost kernel: ALSA 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio.c:1762: 
pci=e7ec8000 irq=5 subdev=0010 Init hardware...
Jan 19 18:59:32 localhost kernel: ALSA 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/darla20_dsp.c:35: 
init_hw() - Darla20
Jan 19 18:59:32 localhost kernel: ALSA 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio.c:38: 
firmware requested: darla20_dsp.fw
Jan 19 18:59:32 localhost kernel: ALSA 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio_dsp.c:393: 
load_dsp: Set bad_board to TRUE
Jan 19 18:59:32 localhost kernel: ALSA 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio_dsp.c:186: 
Read serial number 00445231 00313037 00303630 00000224 0000bef7
Jan 19 18:59:32 localhost kernel: ALSA 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio_dsp.c:508: 
load_dsp: OK!
Jan 19 18:59:32 localhost kernel: ALSA 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio.c:48: 
firmware released
Jan 19 18:59:32 localhost kernel: ALSA 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio_dsp.c:717: 
restore_dsp_settings
Jan 19 18:59:32 localhost kernel: ALSA 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio_dsp.c:759: 
restore_dsp_rettings done
Jan 19 18:59:32 localhost kernel: ALSA 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio_dsp.c:1024: 
init_line_levels
Jan 19 18:59:32 localhost kernel: ALSA 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/darla20_dsp.c:64: 
init_hw done
Jan 19 18:59:32 localhost kernel: ALSA 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio.c:1781: 
Card init OK
Jan 19 18:59:32 localhost kernel: ALSA 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio.c:840: 
Analog PCM ok
Jan 19 18:59:32 localhost kernel: ALSA 
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/echoaudio/echoaudio.c:1932: 
Card registered: Darla20 rev.0 (DSP56301) at 0xdffe0000 irq 5
Jan 19 18:59:32 localhost alsasound: Starting sound driver snd-darla20 
succeeded
Jan 19 18:59:33 localhost alsasound: Starting sequencer succeeded
Jan 19 18:59:33 localhost alsactl: /usr/sbin/alsactl: load_state:1134:
Jan 19 18:59:33 localhost alsactl: No soundcards found...
Jan 19 18:59:33 localhost alsasound: Restoring sound driver settings failed
Jan 19 19:00:01 localhost crond(pam_unix)[5156]: session opened for user 
root by (uid=0)
Jan 19 19:00:01 localhost crond(pam_unix)[5157]: session opened for user 
root by (uid=0)
Jan 19 19:00:01 localhost crond(pam_unix)[5157]: session closed for user 
root
Jan 19 19:00:02 localhost crond(pam_unix)[5156]: session closed for user 
root
Jan 19 19:01:01 localhost crond(pam_unix)[5163]: session opened for user 
root by (uid=0)
Jan 19 19:01:02 localhost crond(pam_unix)[5163]: session closed for user 
root
Jan 19 19:05:01 localhost crond(pam_unix)[5229]: session opened for user 
root by (uid=0)
Jan 19 19:05:02 localhost crond(pam_unix)[5229]: session closed for user 
root
Jan 19 19:08:46 localhost su(pam_unix)[5253]: session opened for user 
root by saul(uid=500)