[PlanetCCRMA] Tascam US-122 not working

[karsten wiese]

--- Daniel Flickinger <danflick@gmail.com> schrieb: >
Hello.  I'm trying to use a Tascam US-122 with my Compaq
> Presario
> 2580us running Redhat 9, but it's never recognized
> properly--the light
> never turns on.  I've just started installing the Planet
> CCRMA
> software, so everything is probably up to date.  I'm
> using kernel
> 2.4.26-1.ll.rh90.ccrma, and ALSA 1.0.4.
> 
> Here is my modules.conf file:
> -----------------------------
> alias eth0 natsemi
> alias usb-controller ehci-hcd
> alias usb-controller1 usb-uhci
> alias ieee1394-controller ohci1394
> # --- ALSA ---
> alias char-major-116 snd
> alias char-major-14 soundcore
> alias snd-card-0 snd-ali5451
> alias snd-card-1 snd-usb-usx2y
>  
> alias sound-slot-0 snd-card-0
> alias sound-service-0-0 snd-mixer-oss
> alias sound-service-0-1 snd-seq-oss
> alias sound-service-0-3 snd-pcm-oss
> alias sound-service-0-8 snd-seq-oss
> alias sound-service-0-12 snd-pcm-oss
>  
> alias sound-slot-1 snd-card-1
> alias sound-service-1-0 snd-mixer-oss
> alias sound-service-1-3 snd-pcm-oss
> alias sound-service-1-12 snd-pcm-oss
> #--- Options
> options snd major=116 cards_limit=2 \
>   device_mode=0666 device_gid=0 device_uid=0
> options snd-ali5451 index=0
> options snd-usb-usx2y index=1 vid=0x1604
>  
> # -- Keep modules from being autocleaned (CCRMA mod)
> add options -k snd-card-0
> add options -k snd-card-1
>  
> # Old OSS stuff?  (I'm not so sure about the last two
> lines)
> # alias sound-slot-0 trident
> # post-install sound-slot-0 /bin/aumix-minimal -f
> /etc/.aumixrc -L
> >/dev/null 2>&1 || :
> # pre-remove sound-slot-0 /bin/aumix-minimal -f
> /etc/.aumixrc -S
> >/dev/null 2>&1 || :
>
------------------------------------------------------------
> 
> Here is my /var/log/messages file after: running
> alsasound stop,
> running alsasound start, and then plugging in the US-122:
> -----------------------------------------
> Jun 27 22:52:00 daf modprobe: modprobe: Can't locate
> module snd-seq-client-62
> Jun 27 22:52:00 daf kernel: usb.c: deregistering driver
> snd-usb-usx2y
> Jun 27 22:52:00 daf kernel: usb.c: deregistering driver
> snd-usb-audio
> Jun 27 22:52:00 daf alsasound: sound driver stop
> succeeded
> Jun 27 22:52:11 daf modprobe: Warning: ignoring
> device_mode=0666, no
> such parameter in this module
> Jun 27 22:52:11 daf modprobe: Warning: ignoring
> device_gid=0, no such parameter
> in this module
> Jun 27 22:52:11 daf modprobe: Warning: ignoring
> device_uid=0, no such parameter
> in this module
> Jun 27 22:52:11 daf modprobe: Module snd loaded, with
> warnings
> Jun 27 22:52:11 daf modprobe: Module snd-ac97-codec
> loaded, with warnings
> Jun 27 22:52:11 daf modprobe: Module snd-timer loaded,
> with warnings
> Jun 27 22:52:11 daf modprobe: Module snd-pcm loaded, with
> warnings
> Jun 27 22:52:11 daf modprobe: Module snd-ali5451 loaded,
> with warnings
> Jun 27 22:52:11 daf alsasound: Starting sound driver
> snd-ali5451 succeeded
> Jun 27 22:52:11 daf kernel: usb.c: registered new driver
> snd-usb-audio
> Jun 27 22:52:11 daf modprobe: Warning: ignoring
> vid=0x1604, no such
> parameter in this module
> Jun 27 22:52:11 daf kernel: usb.c: registered new driver
> snd-usb-usx2y
> Jun 27 22:52:11 daf modprobe: Module snd-usb-usx2y
> loaded, with warnings
> Jun 27 22:52:11 daf alsasound: Starting sound driver
> snd-usb-usx2y succeeded
> Jun 27 22:52:11 daf alsasound: Starting sequencer
> succeeded
> Jun 27 22:52:11 daf alsasound: Restoring sound driver
> settings succeeded
> Jun 27 22:52:21 daf kernel: hub.c: new USB device
> 00:0b.1-2, assigned address 2
> Jun 27 22:52:21 daf kernel: usb.c: USB device 2
> (vend/prod
> 0x1604/0x8006) is not claimed by any active driver.
> Jun 27 22:52:24 daf /etc/hotplug/usb.agent: ... no
> modules for USB
> product 1604/8006/100
> --------------------------------------------
> 
> Many of the options don't seem to be recognized, but the
> real problem
> to me seems to be the last line, no?  Here is a snippet
> of my lsusb -v
> after plugging in:
> -------------------------------------------
> ....
> Bus 003 Device 002: ID 1604:8006 Tascam
>   Language IDs: none (invalid length string descriptor
> 02; len=2)
> Device Descriptor:
>   bLength                18
>   bDescriptorType         1
>   bcdUSB               1.00
>   bDeviceClass          255 Vendor Specific Class
>   bDeviceSubClass       255 Vendor Specific Subclass
>   bDeviceProtocol       255 Vendor Specific Protocol
>   bMaxPacketSize0        64
> .....
> -------------------------------------------
> so it seems that something at least knows that the device
> is there. 
> There is no mention of the device or card1 at all in
> /proc/asound/ or
> the files contained in it.  Running usx2yloader returns
> "usx2yloader:
> no US-X2Y-compatible cards found" (and I'm starting to
> think that this
> is the main problem--the firmware never gets loaded, so
> the device ID
> 8006 never turns into 8007?).   If I run alsasound start
> after the
> device is already plugged in, there is no improvement. 
> Any thoughts? 
> I'm not quite sure how to check which versions of hotplug
> and fxload
> I'm running, but they should definitely be up to date
> enough, it
> seems...
> 

you have installed alsa-firmware?

best,
Karsten


	

	
		
___________________________________________________________
Bestellen Sie Y! DSL und erhalten Sie die AVM "FritzBox SL" für 0€.
Sie sparen 119€ und bekommen 2 Monate Grundgebührbefreiung.
http://de.adsl.yahoo.com