[PlanetCCRMA] cinelerra on athlon/duron
Luc Tanguay
lucus@sympatico.ca
Fri Aug 22 21:36:01 2003
--------------020108000907050402050807
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 8bit
Still having same problem.
More info on my setup.
The audio samples have been recorded at 44100 Hz. They contain one
channel only (mono).
Settings | Preferences | Playback:
- Samples to read ... -> 131072 (=128*1024)
- Sample to send ... -> 2048
- Use software for positioning -> checked
- Audio driver -> OSS (why ALSA is not listed?)
- device path -> /dev/dsp
- bits -> 16 bit linear
- channels -> 2
Here's the output of 'soundtest' from CCRMA distribution of Cinelerra:
*** Half duplex
Couldn't enable full duplex audio.
fragments fragstotal fragsize bytes TOTAL BYTES AVAILABLE
Playback: 2 2 32768 65536 65536
Record: 0 2 32768 0 65536
Why does it say 'half duplex' ?
I've also tried the ' LD_ASSUME_KERNEL=2.2.5 cinelerra' trick and it
does not help.
Regards,
Luc
Fernando Pablo Lopez-Lezcano a écrit:
>>>does anybody use cinelerra on a Duron machine ?
>>>
>>>I had cinelerra-1.1.6-1.ath.rpm installed and was working perfectly.
>>>With the new package cinelerra-1.1.7-1.rh90.athlon, it is not usable
>>>anymore. Here's what happen. If I press play and the cursor is at
>>>the beginning of the movie, there is no sound and I cannot stop it... I
>>>have to kill cinelerra to make it stops. However if the cursor is
>>>somewhere else, it works. Can somebody help me ?
>>>
>>>
>>The same thing happens to me here on a P4 (using an rpm I built
>>locally). I have also excited the program normally only to find it
>>hanging around still ("ps -aux").
>>
>>
>
>Something similar used to happen to me too (unstoppable playback and
>hanging processes after exit) and I found 1.1.7 much better in that
>respect - in very limited tests. I think I had to initially tweak some
>sound setting to get cinelerra to behave decently. I think it was in
>"Preferences", "Playback", "Use software for positioning information".
>Try to change the setting and see if this goes away.
>
>-- Fernando
>
>
>
>
>
--------------020108000907050402050807
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<title></title>
</head>
<body>
Still having same problem.<br>
<br>
More info on my setup.<br>
<br>
The audio samples have been recorded at 44100 Hz. They contain one
channel only (mono).<br>
<br>
Settings | Preferences | Playback:<br>
- Samples to read ... -> 131072 (=128*1024)<br>
- Sample to send ... -> 2048<br>
- Use software for positioning -> checked<br>
- Audio driver -> OSS (why ALSA is not listed?)<br>
- device path -> /dev/dsp<br>
- bits -> 16 bit linear<br>
- channels -> 2<br>
<br>
Here's the output of 'soundtest' from CCRMA distribution of Cinelerra:<br>
<br>
<tt>*** Half duplex<br>
Couldn't enable full duplex audio.<br>
fragments fragstotal fragsize bytes TOTAL BYTES AVAILABLE<br>
Playback: 2 2 32768 65536 65536<br>
Record: 0 2 32768 0 65536</tt><br>
<br>
Why does it say 'half duplex' ? <br>
<br>
<br>
I've also tried the ' LD_ASSUME_KERNEL=2.2.5 cinelerra' trick and it
does not help.<br>
<br>
Regards,<br>
Luc<br>
<br>
Fernando Pablo Lopez-Lezcano a écrit:<br>
<blockquote type="cite"
cite="mid1061573288.13440.13.camel@cmn37.stanford.edu">
<blockquote type="cite">
<blockquote type="cite">
<pre wrap="">does anybody use cinelerra on a Duron machine ?
I had cinelerra-1.1.6-1.ath.rpm installed and was working perfectly.
With the new package cinelerra-1.1.7-1.rh90.athlon, it is not usable
anymore. Here's what happen. If I press play and the cursor is at
the beginning of the movie, there is no sound and I cannot stop it... I
have to kill cinelerra to make it stops. However if the cursor is
somewhere else, it works. Can somebody help me ?
</pre>
</blockquote>
<pre wrap="">The same thing happens to me here on a P4 (using an rpm I built
locally). I have also excited the program normally only to find it
hanging around still ("ps -aux").
</pre>
</blockquote>
<pre wrap=""><!---->
Something similar used to happen to me too (unstoppable playback and
hanging processes after exit) and I found 1.1.7 much better in that
respect - in very limited tests. I think I had to initially tweak some
sound setting to get cinelerra to behave decently. I think it was in
"Preferences", "Playback", "Use software for positioning information".
Try to change the setting and see if this goes away.
-- Fernando
</pre>
</blockquote>
<br>
</body>
</html>
--------------020108000907050402050807--