[PlanetCCRMA] More JACK Problems

[Michael H. Smith]

Mark Knecht wrote:

>Mike,
>   More or less. It depends on your sound card. I have 12 captures and 10
>playbacks. Yours looks fine for a standard stereo card.
>
>   Now, start alsaplayer and then run jack_lsp again. You should see two
>other outputs from alsaplayer.
>
>   Then run qjackconnect and see if the alsaplayer outputs are hooked up to
>your playback ports.
>
>Mark
>
>-----Original Message-----
>From: planetccrma-admin@ccrma.Stanford.EDU
>[mailto:planetccrma-admin@ccrma.Stanford.EDU]On Behalf Of Michael H.
>Smith
>Sent: Sunday, November 17, 2002 5:32 PM
>To: markknecht@attbi.com; planetccrma@ccrma.Stanford.EDU
>Subject: Re: [PlanetCCRMA] More JACK Problems
>
>
>I figured out that jack_lsp came from the example clients rpm which I
>have now installed.  When I run jack_lsp, I get the following:
>
>                    alsa_pcm:capture_1
>                    alsa_pcm:capture_2
>                    alsa_pcm:playback_1
>                    alsa_pcm:playback_2
>
>Is this what I should see?
>
>Mike
>
>
>
>_______________________________________________
>PlanetCCRMA mailing list
>PlanetCCRMA@ccrma.stanford.edu
>http://ccrma-mail.stanford.edu/mailman/listinfo/planetccrma
>
>_______________________________________________
>PlanetCCRMA mailing list
>PlanetCCRMA@ccrma.stanford.edu
>http://ccrma-mail.stanford.edu/mailman/listinfo/planetccrma
>
>  
>
Well, I couldn't get jack_lsp to run when alsaplayer was up, but I ran 
qjackconnect and then alsaplayer and could see the connection of 
alsaplayer outs to alsa_pcm:playbacks, but still no playback using 
alsaplayer.  Itjust won't play the files.  It's not that the files play, 
but no sound.  The files won't play at all.

Mike