<div dir="ltr">Hi Tim,<div>You can timestamp the MIDI events relative to the next audio frame using the system steady clock. The very first MIDI event received will have delta time zero, all following events will have delta time measured relative to the first event. By relating these to the system clock and the system time recorded at the audio callback you can estimate for a particular MIDI event its time within the next audio frame. Also you don't need to be sample-perfect, all commercial software synths I know will discretize the MIDI events processing within an audio frame to 16 or 32 samples @44.1-48kHz. You may also let the jitter be and just decrease the audio frame size to minimize it (Raspberry Pi will be able to do 256 samples per frame @44.1kHz with its onboard audio), it may not be that critical for an instrument you are developing.</div><div><br></div><div>Cheers,</div><div><br></div><div>Arthur.</div><div><br></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Tue, Apr 12, 2022 at 10:06 PM Tim Grant <<a href="mailto:tim@rootdown.net">tim@rootdown.net</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr"><div>Hello!<br><br>I've recently started prototyping a synthesizer project using RtAudio and RtMidi. I'm doing the initial development in Windows and I plan to eventually port the project to something like a Raspberry Pi if the prototype goes well.</div><div><br></div><div>I have the audio output and MIDI input working, and I'm starting to think about triggering the synth voices with MIDI notes. I would like to keep the jitter between the notes and the triggered sounds low, but I'm not quite sure how to achieve this with these two APIs.</div><div><br></div><div>A diagram might be helpful here:<br><span style="font-family:monospace">MIDI -----N----------------------N--------------------------><br>Input | |<br> | |<br>Audio |----*-----|----P-----|-----*----|-----P----|----------><br>Stream Frame 1 Frame 2 Frame 3 Frame 4 Frame 5</span></div><div><br></div><div>My thinking is that I need to know at what point in the current audio frame an MIDI note arrives. From the diagram, assume a note (N) arrives at the moment corresponding to the 5th sample in Frame 1; knowing this, I can begin playback at the 5th sample on the next frame (P). This way, the latency is held constant at 1 frame and the amount of jitter is minimized.</div><div><br></div><div>So with that long-winded introduction out of the way, my question is:</div><div><br></div><div>Is it possible to recover the timing of MIDI events relative to the audio stream? I can't see how to do this using the delta time provided with the MIDI note and the stream time provided by RtAudio, but my hope is that I'm missing something.</div><div><br></div><div>Thanks!</div><div><br></div><div>Tim<br></div></div>
_______________________________________________<br>
Stk mailing list<br>
<a href="mailto:Stk@ccrma.stanford.edu" target="_blank">Stk@ccrma.stanford.edu</a><br>
<a href="https://cm-mail.stanford.edu/mailman/listinfo/stk" rel="noreferrer" target="_blank">https://cm-mail.stanford.edu/mailman/listinfo/stk</a><br>
</blockquote></div>