<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
<font size="-1">Name : alsa-tools Relocations:
(not relocatable)<br>
Version : 1.0.10 Vendor: Planet CCRMA<br>
Release : 0.1.rc1.rhfc4.ccrma Build Date: Mon 29 Aug 2005
09:23:44 PM PDT<br>
Install Date: Wed 31 Aug 2005 07:54:01 PM PDT Build Host:
build.ccrma.stanford.edu<br>
Group : System/Tools Source RPM:
alsa-tools-1.0.10-0.1.rc1.rhfc4.ccrma.src.rpm<br>
<br>
Yes, in qjackctl:<br>
<br>
using 'jackd'<br>
driver 'alsa' of course<br>
realtime perameter checked<br>
<br>
here is the output:<br>
<br>
10:45:01.004 Startup script...<br>
10:45:01.005 artsshell -q terminate<br>
sound server terminated<br>
10:45:01.541 Startup script terminated successfully.<br>
10:45:01.565 JACK is starting...<br>
10:45:01.568 /usr/bin/jackd -R -dalsa -dhw:0 -r44100 -p1024 -n2 -i2 -o2<br>
10:45:01.599 JACK was started with PID=12811 (0x320b).<br>
jackd 0.100.1<br>
Copyright 2001-2005 Paul Davis and others.<br>
jackd comes with ABSOLUTELY NO WARRANTY<br>
This is free software, and you are welcome to redistribute it<br>
under certain conditions; see the file COPYING for details<br>
JACK compiled with System V SHM support.<br>
loading driver ..<br>
apparent rate = 44100<br>
creating alsa driver ...
hw:0|hw:0|1024|2|44100|2|2|nomon|swmeter|-|32bit<br>
control device hw:0<br>
the playback device "hw:0" is already in use. Please stop the
application using it and run JACK again<br>
cannot load driver module alsa<br>
10:45:03.864 Could not connect to JACK server as client.<br>
10:45:03.933 JACK was stopped successfully.<br>
could not attach as JACK client (server has exited)<br>
<br>
I'm about to reboot with the new modprobe.conf you gave me and see if
that changes anything. To me, it doesn't seem related.<br>
<br>
bb<br>
</font><br>
Fernando Lopez-Lezcano wrote:
<blockquote cite="mid1128187606.8685.8.camel@cmn3.stanford.edu"
type="cite">
<pre wrap="">On Fri, 2005-09-30 at 22:51 -0700, Bob Bailey wrote:
</pre>
<blockquote type="cite">
<pre wrap="">Thanks Fernando. I think I determined that I didn't need to run
alsaconf, but only after I'd run it. Can I then delete the alsaconf
generated section and replace with your suggestion from below?
by the way, here is /proc/asound/cards and /proc/devices:
[root@daw bbailey]# cat /proc/asound/cards
0 [M410 ]: ICE1712 - M Audio Delta 410
M Audio Delta 410 at 0xd000, irq 10
</pre>
</blockquote>
<pre wrap=""><!---->
</pre>
<blockquote type="cite">
<pre wrap="">looks like ALSA is there.
When I start envy24control, it starts to initiate, but quickly closes.
hmmm. here is the output:
[root@daw bbailey]# envy24control
using --- input_channels: 2
--- output_channels: 8
--- pcm_output_channels: 8
--- spdif in/out channels: 2
Segmentation fault
</pre>
</blockquote>
<pre wrap=""><!---->
What version of alsa-tools do you have installed?
rpm -q -i alsa-tools
</pre>
<blockquote type="cite">
<pre wrap="">started jackd and got this.... looks like it is up. Is there a reason
it wouldn't start with qjackctl?
</pre>
</blockquote>
<pre wrap=""><!---->
Check what options you have in qjackctl (in "Setup"), check that you are
starting it with "jackd" and not "jackstart".
-- Fernando
</pre>
<blockquote type="cite">
<pre wrap="">[root@daw bbailey]# jackd -R -d alsa -d hw
jackd 0.100.1
Copyright 2001-2005 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK compiled with System V SHM support.
loading driver ..
creating alsa driver ... hw|hw|1024|2|48000|0|0|nomon|swmeter|-|32bit
configuring for 48000Hz, period = 1024 frames, buffer = 2 periods
nperiods = 2 for capture
nperiods = 2 for playback
</pre>
</blockquote>
<pre wrap=""><!---->
_______________________________________________
PlanetCCRMA mailing list
<a class="moz-txt-link-abbreviated" href="mailto:PlanetCCRMA@ccrma.stanford.edu">PlanetCCRMA@ccrma.stanford.edu</a>
<a class="moz-txt-link-freetext" href="http://ccrma-mail.stanford.edu/mailman/listinfo/planetccrma">http://ccrma-mail.stanford.edu/mailman/listinfo/planetccrma</a>
</pre>
</blockquote>
</body>
</html>