[PlanetCCRMA] Echo mixer doesn't show up

[Len]

--- On Mon, 2/7/11, Juan Reyes <juanig at ccrma.Stanford.EDU> wrote:

From: Juan Reyes <juanig at ccrma.Stanford.EDU>
Subject: [PlanetCCRMA] Echo mixer doesn't show up
To: "planetCCRMA" <planetccrma at ccrma.Stanford.EDU>
Date: Monday, February 7, 2011, 4:57 PM


Hi,

I am Running PlanetCCRMA's F-14 x86_64 with a Gina3G soundcard but I
cannot get the Echo Mixer to show up. Jack starts fine!.

Command line shows the following message:

[blueberry juanig] ~> echomixer &
[1] 23914
[blueberry juanig] ~> Cannot find the font


'cat /proc/asound/cards' shows:

[blueberry juanig] ~> cat /proc/asound/cards 
 0 [Gina3G         ]: Echo_Echo3G - Gina3G
                      Gina3G rev.0 (DSP56361) at 0xfeb00000 irq 17

'cat /proc/asound/devices' shows:
[blueberry juanig] ~> cat /proc/asound/devices 
  2:        : timer
  3:        : sequencer
  4: [ 0- 0]: raw midi
  5: [ 0- 1]: digital audio playback
  6: [ 0- 1]: digital audio capture
  7: [ 0- 0]: digital audio playback
  8: [ 0- 0]: digital audio capture
  9: [ 0]   : control

  Thanks a lot!,

  --* Juan
Yes, I had this same problem.  You need to 'yum install xorg-x11-fonts-misc'.  That should fix it.

Len





      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://ccrma-mail.stanford.edu/pipermail/planetccrma/attachments/20110207/e94e7141/attachment.html