[PlanetCCRMA] re: no realtime

[Mark Knecht]

Hi Jonathan,

1) Is the realtime module loaded?

2) Do you have a realtime group set up in /etc/group

3) Is your user part of that group?

4) If it is loaded, how is is loaded? (What options?) I load mine like this:

realtime gid=600 any=1

Where my realtime group is 600.

Hope this helps.

On 10/30/05, jonathan <jsegel at magneticmotorworks.com> wrote:
> here's the error message in qjackctl:
>
> JACK compiled with System V SHM support.
> cannot lock down memory for jackd (Cannot allocate memory)
> loading driver ..
> apparent rate = 44100
> creating alsa driver ... hw:2|hw:2|1024|2|44100|0|0|nomon|swmeter|-|32bit
> control device hw:2
> configuring for 44100Hz, period = 1024 frames, buffer = 2 periods
> nperiods = 2 for capture
> nperiods = 2 for playback
> JACK: unable to mlock() port buffers: Cannot allocate memory
> jack_create_thread: error -1 switching current thread to rt for
> inheritance: Unknown error 4294967295
> cannot start watchdog thread
> cannot load driver module alsa
> 14:19:54.504 Could not connect to JACK server as client.
> could not attach as JACK client (server has exited)
> 14:19:54.597 JACK was stopped successfully.
>
> _______________________________________________
> PlanetCCRMA mailing list
> PlanetCCRMA at ccrma.stanford.edu
> http://ccrma-mail.stanford.edu/mailman/listinfo/planetccrma
>