[PlanetCCRMA] Alsa-Jack config on Fedora 4

[Fernando Lopez-Lezcano]

On Fri, 2005-09-30 at 22:51 -0700, Bob Bailey wrote:
> Thanks Fernando.  I think I determined that I didn't need to run
> alsaconf, but only after I'd run it.  Can I then delete the alsaconf
> generated section and replace with your suggestion from below?
> 
> by the way, here is /proc/asound/cards and /proc/devices:
> 
> [root at daw bbailey]# cat /proc/asound/cards
> 0 [M410           ]: ICE1712 - M Audio Delta 410
>                      M Audio Delta 410 at 0xd000, irq 10

> looks like ALSA is there.
> 
> When I start envy24control, it starts to initiate, but quickly closes.
> hmmm.  here is the output:
> 
> [root at daw bbailey]# envy24control
> using    --- input_channels: 2
>          --- output_channels: 8
>          --- pcm_output_channels: 8
>          --- spdif in/out channels: 2
> Segmentation fault

What version of alsa-tools do you have installed?
  rpm -q -i alsa-tools
> 
> started jackd and got this.... looks like it is up.  Is there a reason
> it wouldn't start with qjackctl? 

Check what options you have in qjackctl (in "Setup"), check that you are
starting it with "jackd" and not "jackstart".

-- Fernando
> 
> [root at daw bbailey]# jackd -R -d alsa -d hw
> jackd 0.100.1
> Copyright 2001-2005 Paul Davis and others.
> jackd comes with ABSOLUTELY NO WARRANTY
> This is free software, and you are welcome to redistribute it
> under certain conditions; see the file COPYING for details
> 
> JACK compiled with System V SHM support.
> loading driver ..
> creating alsa driver ... hw|hw|1024|2|48000|0|0|nomon|swmeter|-|32bit
> configuring for 48000Hz, period = 1024 frames, buffer = 2 periods
> nperiods = 2 for capture
> nperiods = 2 for playback