[PlanetCCRMA] Alsa-Jack config on Fedora 4

[Bob Bailey]

by the way nando - i'm using 2.6.13-0.3.rdt.rhfc4.ccrma.... if that matters.

Fernando Lopez-Lezcano wrote:

>On Fri, 2005-09-30 at 22:51 -0700, Bob Bailey wrote:
>  
>
>>Thanks Fernando.  I think I determined that I didn't need to run
>>alsaconf, but only after I'd run it.  Can I then delete the alsaconf
>>generated section and replace with your suggestion from below?
>>
>>by the way, here is /proc/asound/cards and /proc/devices:
>>
>>[root@daw bbailey]# cat /proc/asound/cards
>>0 [M410           ]: ICE1712 - M Audio Delta 410
>>                     M Audio Delta 410 at 0xd000, irq 10
>>    
>>
>
>  
>
>>looks like ALSA is there.
>>
>>When I start envy24control, it starts to initiate, but quickly closes.
>>hmmm.  here is the output:
>>
>>[root@daw bbailey]# envy24control
>>using    --- input_channels: 2
>>         --- output_channels: 8
>>         --- pcm_output_channels: 8
>>         --- spdif in/out channels: 2
>>Segmentation fault
>>    
>>
>
>What version of alsa-tools do you have installed?
>  rpm -q -i alsa-tools
>  
>
>>started jackd and got this.... looks like it is up.  Is there a reason
>>it wouldn't start with qjackctl? 
>>    
>>
>
>Check what options you have in qjackctl (in "Setup"), check that you are
>starting it with "jackd" and not "jackstart".
>
>-- Fernando
>  
>
>>[root@daw bbailey]# jackd -R -d alsa -d hw
>>jackd 0.100.1
>>Copyright 2001-2005 Paul Davis and others.
>>jackd comes with ABSOLUTELY NO WARRANTY
>>This is free software, and you are welcome to redistribute it
>>under certain conditions; see the file COPYING for details
>>
>>JACK compiled with System V SHM support.
>>loading driver ..
>>creating alsa driver ... hw|hw|1024|2|48000|0|0|nomon|swmeter|-|32bit
>>configuring for 48000Hz, period = 1024 frames, buffer = 2 periods
>>nperiods = 2 for capture
>>nperiods = 2 for playback
>>    
>>
>
>
>_______________________________________________
>PlanetCCRMA mailing list
>PlanetCCRMA@ccrma.stanford.edu
>http://ccrma-mail.stanford.edu/mailman/listinfo/planetccrma
>
>  
>