[PlanetCCRMA] Alsa-Jack config on Fedora 4
Bob Bailey
bob@digisonus.com
Sat Oct 1 10:44:01 2005
This is a multi-part message in MIME format.
--------------010602000007010300030606
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Name : alsa-tools Relocations: (not relocatable)
Version : 1.0.10 Vendor: Planet CCRMA
Release : 0.1.rc1.rhfc4.ccrma Build Date: Mon 29 Aug 2005
09:23:44 PM PDT
Install Date: Wed 31 Aug 2005 07:54:01 PM PDT Build Host:
build.ccrma.stanford.edu
Group : System/Tools Source RPM:
alsa-tools-1.0.10-0.1.rc1.rhfc4.ccrma.src.rpm
Yes, in qjackctl:
using 'jackd'
driver 'alsa' of course
realtime perameter checked
here is the output:
10:45:01.004 Startup script...
10:45:01.005 artsshell -q terminate
sound server terminated
10:45:01.541 Startup script terminated successfully.
10:45:01.565 JACK is starting...
10:45:01.568 /usr/bin/jackd -R -dalsa -dhw:0 -r44100 -p1024 -n2 -i2 -o2
10:45:01.599 JACK was started with PID=12811 (0x320b).
jackd 0.100.1
Copyright 2001-2005 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK compiled with System V SHM support.
loading driver ..
apparent rate = 44100
creating alsa driver ... hw:0|hw:0|1024|2|44100|2|2|nomon|swmeter|-|32bit
control device hw:0
the playback device "hw:0" is already in use. Please stop the
application using it and run JACK again
cannot load driver module alsa
10:45:03.864 Could not connect to JACK server as client.
10:45:03.933 JACK was stopped successfully.
could not attach as JACK client (server has exited)
I'm about to reboot with the new modprobe.conf you gave me and see if
that changes anything. To me, it doesn't seem related.
bb
Fernando Lopez-Lezcano wrote:
>On Fri, 2005-09-30 at 22:51 -0700, Bob Bailey wrote:
>
>
>>Thanks Fernando. I think I determined that I didn't need to run
>>alsaconf, but only after I'd run it. Can I then delete the alsaconf
>>generated section and replace with your suggestion from below?
>>
>>by the way, here is /proc/asound/cards and /proc/devices:
>>
>>[root@daw bbailey]# cat /proc/asound/cards
>>0 [M410 ]: ICE1712 - M Audio Delta 410
>> M Audio Delta 410 at 0xd000, irq 10
>>
>>
>
>
>
>>looks like ALSA is there.
>>
>>When I start envy24control, it starts to initiate, but quickly closes.
>>hmmm. here is the output:
>>
>>[root@daw bbailey]# envy24control
>>using --- input_channels: 2
>> --- output_channels: 8
>> --- pcm_output_channels: 8
>> --- spdif in/out channels: 2
>>Segmentation fault
>>
>>
>
>What version of alsa-tools do you have installed?
> rpm -q -i alsa-tools
>
>
>>started jackd and got this.... looks like it is up. Is there a reason
>>it wouldn't start with qjackctl?
>>
>>
>
>Check what options you have in qjackctl (in "Setup"), check that you are
>starting it with "jackd" and not "jackstart".
>
>-- Fernando
>
>
>>[root@daw bbailey]# jackd -R -d alsa -d hw
>>jackd 0.100.1
>>Copyright 2001-2005 Paul Davis and others.
>>jackd comes with ABSOLUTELY NO WARRANTY
>>This is free software, and you are welcome to redistribute it
>>under certain conditions; see the file COPYING for details
>>
>>JACK compiled with System V SHM support.
>>loading driver ..
>>creating alsa driver ... hw|hw|1024|2|48000|0|0|nomon|swmeter|-|32bit
>>configuring for 48000Hz, period = 1024 frames, buffer = 2 periods
>>nperiods = 2 for capture
>>nperiods = 2 for playback
>>
>>
>
>
>_______________________________________________
>PlanetCCRMA mailing list
>PlanetCCRMA@ccrma.stanford.edu
>http://ccrma-mail.stanford.edu/mailman/listinfo/planetccrma
>
>
>
--------------010602000007010300030606
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
<font size="-1">Name : alsa-tools Relocations:
(not relocatable)<br>
Version : 1.0.10 Vendor: Planet CCRMA<br>
Release : 0.1.rc1.rhfc4.ccrma Build Date: Mon 29 Aug 2005
09:23:44 PM PDT<br>
Install Date: Wed 31 Aug 2005 07:54:01 PM PDT Build Host:
build.ccrma.stanford.edu<br>
Group : System/Tools Source RPM:
alsa-tools-1.0.10-0.1.rc1.rhfc4.ccrma.src.rpm<br>
<br>
Yes, in qjackctl:<br>
<br>
using 'jackd'<br>
driver 'alsa' of course<br>
realtime perameter checked<br>
<br>
here is the output:<br>
<br>
10:45:01.004 Startup script...<br>
10:45:01.005 artsshell -q terminate<br>
sound server terminated<br>
10:45:01.541 Startup script terminated successfully.<br>
10:45:01.565 JACK is starting...<br>
10:45:01.568 /usr/bin/jackd -R -dalsa -dhw:0 -r44100 -p1024 -n2 -i2 -o2<br>
10:45:01.599 JACK was started with PID=12811 (0x320b).<br>
jackd 0.100.1<br>
Copyright 2001-2005 Paul Davis and others.<br>
jackd comes with ABSOLUTELY NO WARRANTY<br>
This is free software, and you are welcome to redistribute it<br>
under certain conditions; see the file COPYING for details<br>
JACK compiled with System V SHM support.<br>
loading driver ..<br>
apparent rate = 44100<br>
creating alsa driver ...
hw:0|hw:0|1024|2|44100|2|2|nomon|swmeter|-|32bit<br>
control device hw:0<br>
the playback device "hw:0" is already in use. Please stop the
application using it and run JACK again<br>
cannot load driver module alsa<br>
10:45:03.864 Could not connect to JACK server as client.<br>
10:45:03.933 JACK was stopped successfully.<br>
could not attach as JACK client (server has exited)<br>
<br>
I'm about to reboot with the new modprobe.conf you gave me and see if
that changes anything. To me, it doesn't seem related.<br>
<br>
bb<br>
</font><br>
Fernando Lopez-Lezcano wrote:
<blockquote cite="mid1128187606.8685.8.camel@cmn3.stanford.edu"
type="cite">
<pre wrap="">On Fri, 2005-09-30 at 22:51 -0700, Bob Bailey wrote:
</pre>
<blockquote type="cite">
<pre wrap="">Thanks Fernando. I think I determined that I didn't need to run
alsaconf, but only after I'd run it. Can I then delete the alsaconf
generated section and replace with your suggestion from below?
by the way, here is /proc/asound/cards and /proc/devices:
[root@daw bbailey]# cat /proc/asound/cards
0 [M410 ]: ICE1712 - M Audio Delta 410
M Audio Delta 410 at 0xd000, irq 10
</pre>
</blockquote>
<pre wrap=""><!---->
</pre>
<blockquote type="cite">
<pre wrap="">looks like ALSA is there.
When I start envy24control, it starts to initiate, but quickly closes.
hmmm. here is the output:
[root@daw bbailey]# envy24control
using --- input_channels: 2
--- output_channels: 8
--- pcm_output_channels: 8
--- spdif in/out channels: 2
Segmentation fault
</pre>
</blockquote>
<pre wrap=""><!---->
What version of alsa-tools do you have installed?
rpm -q -i alsa-tools
</pre>
<blockquote type="cite">
<pre wrap="">started jackd and got this.... looks like it is up. Is there a reason
it wouldn't start with qjackctl?
</pre>
</blockquote>
<pre wrap=""><!---->
Check what options you have in qjackctl (in "Setup"), check that you are
starting it with "jackd" and not "jackstart".
-- Fernando
</pre>
<blockquote type="cite">
<pre wrap="">[root@daw bbailey]# jackd -R -d alsa -d hw
jackd 0.100.1
Copyright 2001-2005 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK compiled with System V SHM support.
loading driver ..
creating alsa driver ... hw|hw|1024|2|48000|0|0|nomon|swmeter|-|32bit
configuring for 48000Hz, period = 1024 frames, buffer = 2 periods
nperiods = 2 for capture
nperiods = 2 for playback
</pre>
</blockquote>
<pre wrap=""><!---->
_______________________________________________
PlanetCCRMA mailing list
<a class="moz-txt-link-abbreviated" href="mailto:PlanetCCRMA@ccrma.stanford.edu">PlanetCCRMA@ccrma.stanford.edu</a>
<a class="moz-txt-link-freetext" href="http://ccrma-mail.stanford.edu/mailman/listinfo/planetccrma">http://ccrma-mail.stanford.edu/mailman/listinfo/planetccrma</a>
</pre>
</blockquote>
</body>
</html>
--------------010602000007010300030606--