[PlanetCCRMA] Installed planetccrma: now no sound (ens1370)
Peter Baker (CMIS, St Lucia)
Peter.Baker at csiro.au
Mon May 30 20:38:04 PDT 2005
Thanks Greg and others!
> # play ~gdweber/music/samples/submarine/ping.wav
> (There is no sound.)
>
> # alsactl restore
> # play ~gdweber/music/samples/submarine/ping.wav
> (Now there is sound!)
Tried this one too but still no luck. Not one single message in dmesg
or /var/log/messages that looks like an error
I think I'll forget about computer music for a week or so and actually
play some music in my spare time again.... rather than computing at
work and home... Nevermind, I guess I'll get back to it in a while
and check the hardware/software then ;-)
Thanks again!!
Cheers
Peter
Dr Peter Baker, Statistician (Bioinformatics/Genetics),
CSIRO Mathematical & Information Sciences, Queensland Bioscience Precinct
306 Carmody Road, St Lucia Qld 4067. Australia.
Email: <Peter.Baker at csiro.au> WWW: http://www.cmis.csiro.au/Peter.Baker/
Phone: +61 7 3214 2210 Fax: +61 7 3214 2900
On Sat, 28 May 2005, gdweber at indiana.edu wrote:
> I had a similar experience to Peter's after installing PlanetCCRMA
> over Fedora Core 3, but found a way to work around it:
>
> # service alsasound restart
> Shutting down sound driver [ OK ]
> Starting sound driver snd-intel8x0 [ OK ]
> Starting sound driver snd-intel8x0 [ OK ]
> Starting sequencer [ OK ]
> Restoring sound driver settings /usr/sbin/alsactl: load_state:1272:
> No soundcards found...
> [FAILED]
> # play ~gdweber/music/samples/submarine/ping.wav
> (There is no sound.)
>
> # alsactl restore
> # play ~gdweber/music/samples/submarine/ping.wav
> (Now there is sound!)
>
> I wonder why "alsactl restore" works from the command line but not
> from the startup script.
>
> Also, I don't seem to have any problems after the computer boots up,
> at least not lately; only when I try to restart alsasound manually.
> I don't understand this either.
>
> Greg
>
> "Peter Baker (CMIS, St Lucia)" <Peter.Baker at csiro.au> writes:
>
>> Hi Fernando
>>
>> Where do you find the energy to answer all these queries? Thanks for
>> your response!
>>
>> I've tried just basic things
>>
>> Gnome CD player
>> alsaplay (aplay? - I'm not at home so not on the computer in question)
>> xmms (wave and mp3)
>>
>> not sure what to use for midi so tried Rosegarden but first things
>> first
>>
>> google does throw up quite a few errors like
>>>> Starting sequencer driver snd-seq-midi [ OK ]
>>>> Restoring sound driver settings /usr/sbin/alsactl: load_state:1272: No
>>>> soundcards found...
>>>> [FAILED]
>> but there seem to be few consistent answers
>>
>> Thanks again
>>
>> Cheers
>> Peter
>>
>> --
>> Dr Peter Baker, Statistician (Bioinformatics/Genetics),
>> CSIRO Mathematical & Information Sciences, Queensland Bioscience Precinct
>> 306 Carmody Road, St Lucia Qld 4067. Australia.
>> Email: <Peter.Baker at csiro.au> WWW: http://www.cmis.csiro.au/Peter.Baker/
>> Phone: +61 7 3214 2210 Fax: +61 7 3214 2900
>>
>>
>> On Thu, 25 May 2005, Fernando Lopez-Lezcano wrote:
>>
>>> On Tue, 2005-05-24 at 22:13, Peter Baker (CMIS, St Lucia) wrote:
>>>> Hi
>>>>
>>>> I've bitten the bullet and finally installed latest planetccrma for FC3
>>>>
>>>> I did the same for FC1 a year ago and that seemed to work but I didn't
>>>> test it much
>>>>
>>>> Now the sound has disappeared altogether after working just fine for
>>>> CD/MP3 on latest FC3 kernel. It looks like everything is fine, there
>>>> is no sound
>>>
>>> Looking at the details below I don't find anything that jumps out as a
>>> potential culprit. What is it you are using to test sound? How does it
>>> fail?
>>>
>>> I would, in sequence:
>>> - stop the sound driver (/etc/rc.d/init.d/alsasound stop)
>>> - make sure no alsa sound modules remain loaded
>>> - remove the mixer configuration (rm /etc/asound.state)
>>> - start the sound driver with no configuration
>>> (/etc/rc.d/init.d/alsasound start)
>>> - start alsamixer as root, unmute and set levels
>>> - store the configuration (/usr/sbin/alsactl store)
>>> - try out sound... (for example aplay a wav file)
>>>
>>> -- Fernando
>>>
>>>> Details:
>>>>
>>>>
>>>> [peteb at pianoman ~]$ uname -a
>>>> Linux pianoman 2.6.10-2.1.ll.rhfc3.ccrmasmp #1 SMP Thu Dec 30 03:42:15 EST 2004
>>>> i686 i686 i386 GNU/Linux
>>>>
>>>> or the same if I use the non smp kernel
>>>>
>>>> TRIED PLAYING AROUND WITH alsamixer as root and user but no change
>>>>
>>>> [root at pianoman drivers]# service alsasound restart
>>>> Shutting down sound driver [ OK ]
>>>> Starting sound driver snd-ens1370 [ OK ]
>>>> Starting sound driver snd-ens1370 [ OK ]
>>>> Starting sequencer [ OK ]
>>>> Starting sequencer driver snd-seq-midi [ OK ]
>>>> Restoring sound driver settings /usr/sbin/alsactl: load_state:1272: No
>>>> soundcards found...
>>>> [FAILED]
>>>> BUT IF I REPEAT THIS A FEW TIMES it doesn't complain
>>>>
>>>> [root at pianoman drivers]# lspci
>>>> 00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev
>>>> 03)
>>>> 00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
>>>> 00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
>>>> 00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
>>>> 00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
>>>> 00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
>>>> 00:09.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI] (rev 01)
>>>> 00:0a.0 SCSI storage controller: LSI Logic / Symbios Logic 53c810 (rev 23)
>>>> 01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200 AGP (rev 01)
>>>>
>>>> [root at pianoman drivers]# rpm -qa | sort | grep alsa
>>>> alsa-driver-1.0.9-0.1.rc1.rhfc3.ccrma
>>>> alsa-firmware-1.0.8-1.rhfc3.ccrma
>>>> alsa-lib-1.0.9-0.1.rc1.rhfc3.ccrma
>>>> alsa-lib-devel-1.0.9-0.1.rc1.rhfc3.ccrma
>>>> alsa-oss-1.0.9-0.1.rc1.rhfc3.ccrma
>>>> alsa-patch-bay-1.0.0-1.rhfc1.ccrma
>>>> alsaplayer-0.99.76-3.rhfc3.ccrma
>>>> alsaplayer-devel-0.99.76-3.rhfc3.ccrma
>>>> alsa-tools-1.0.9-0.1.rc1.rhfc3.ccrma
>>>> alsa-utils-1.0.9-0.1.rc1.rhfc3.ccrma
>>>> balsa-2.2.4-1.FC3.1
>>>> clalsadrv-1.0.1-1.rhfc3.ccrma
>>>> kernel-module-alsa-2.6.10-2.1.ll.rhfc3.ccrma-1.0.9-0.1.rc1.rhfc3.ccrma
>>>> kernel-module-alsa-2.6.10-2.1.ll.rhfc3.ccrmasmp-1.0.9-0.1.rc1.rhfc3.ccrma
>>>>
>>>> [root at pianoman drivers]# cat /proc/asound/cards
>>>> 0 [AudioPCI ]: ENS1370 - Ensoniq AudioPCI
>>>> Ensoniq AudioPCI ENS1370 at 0xe400, irq 169
>>>>
>>>> [root at pianoman drivers]# cat /proc/asound/devices
>>>> 8: [0- 0]: raw midi
>>>> 17: [0- 1]: digital audio playback
>>>> 16: [0- 0]: digital audio playback
>>>> 24: [0- 0]: digital audio capture
>>>> 0: [0- 0]: ctl
>>>> 1: : sequencer
>>>> 33: : timer
>>>> [root at pianoman drivers]#
>>>>
>>>> _______________________________________________
>>>> PlanetCCRMA mailing list
>>>> PlanetCCRMA at ccrma.stanford.edu
>>>> http://ccrma-mail.stanford.edu/mailman/listinfo/planetccrma
>>>
>>
>> _______________________________________________
>> PlanetCCRMA mailing list
>> PlanetCCRMA at ccrma.stanford.edu
>> http://ccrma-mail.stanford.edu/mailman/listinfo/planetccrma
>
>
More information about the PlanetCCRMA
mailing list