[PlanetCCRMA] getting sbawe32 isa pnp working?

Fernando Lopez-Lezcano nando@ccrma.Stanford.EDU
Sun Mar 27 19:54:02 2005


On Fri, 2005-03-25 at 21:29, mrgrimm@radioactivecatfish.com wrote:
> ahoy all..
> 
>   i have a working fc2 system, all updated and had originally working
> with a sblive pci...  well, i found an old sb AWE 32 isa pnp card,
> swapped, and had some problems getting it working..
> 
>   when booting up, dmesg reports finding the card
> 
> isapnp: Scanning for PnP cards...
> pnp: SB audio device quirk - increasing port range
> pnp: AWE32 quirk - adding two ports
> isapnp: Card 'Creative SB32 PnP'
> isapnp: 1 Plug & Play card detected total
> 
>  but system-config-soundcard detects nothing, and xmms indicates that
> no output device is available, same with alsa.. however, after running
> 
> modprobe snd-sbawe
> 
> sound works, though system-config-soundcard still returns nothing... 
> is there a way to have the card automatically setup during boot to
> avoid the modprobe step??

Check what you have in /etc/modprobe.conf. Try replacing the references
to the sblive kernel module with the module for your replacement card
(snd-sbawe)...

-- Fernnado