[PlanetCCRMA] Problems with midiman Oxygen8 under FC3

[Fernando Lopez-Lezcano]

On Thu, 2005-03-10 at 17:32, Peter Howard wrote:
> This was working under FC2.  But after reinstalling the firmware loader
> for FC3 I get the following trace in /var/log/messages
> 
> Mar 11 12:27:51 wagner /etc/hotplug/usb/midisport_fw:
> load /usr/share/usb/midisport/MidiSportKS.ihx for 763/1014/1
> to /proc/bus/usb/003/011
> Mar 11 12:27:56 wagner kernel: usb 3-2: USB disconnect, address 11
> Mar 11 12:27:57 wagner kernel: usb 3-2: new full speed USB device using
> uhci_hcd and address 12
> 
> 
> I.e. there is a disconnect and immediate reconnect after loading the
> firmware.

I think this is normal (from what I remember). The usb device becomes a
different device after the firmware load, so it disconnects and
reconnects again with a different "personality" (which should now behave
as a normal midi device). 

-- Fernando