[PlanetCCRMA] Turtle Beach USB MIDI cable not recognized in Jack

[Mark Knecht]

On Tue, 01 Feb 2005 10:05:12 -0800, David Hill <cardinalrg2@verizon.net> wrote:
> Hello all,
> 
>         I have been lurking for some time now and seeing as this is my first
> post I would like to thank all of you for doing such a great job of
> supporting audio under Linux. In the short time I have been on the list
> I have learned quite a lot. Kudo's to all! The problem I am having is
> that the USB MIDI cable is not being seen on my main FC3 box in jack. I
> can use the cable on my laptop without issue. I have spent several days
> surfing to try and figure this out to no avail. I am not sure what
> information will be useful in figuring this out so I will give you what
> I have so far.
> 
> Thanks in advance,
> Dave
> 

> usbmidi: found [ Turtle Beach USB MIDI 1x1 ] (0x10f5:0x0003), attached:
> usbmidi: /dev/midi00: in (ep:81 cid: 0 bufsiz:64) out (ep:01 cid: 0
> bufsiz:64)
> usbcore: registered new driver midi
> usbcore: registered new driver snd-usb-audio
> 

Hi,
   Seems like it's there, at least a little bit. Try providing the output of

cat /proc/asound/version
cat /proc/asound/cards
cat /proc/interrupts

cat //etc/modprobe.conf

and let's see if any ideas pop up.

   I didn't lok at the Alsa page. Is this device supported?

Welcome and good luck,
Mark