[PlanetCCRMA] detailed envy24control documentation?

[Aaron Slocum]

Maybe I'm missing some of the thread here, but here's my 2 cents.

 

The 1010LT has jumpers on the actual card that switch the two XLR inputs
between line-level signal and pre-amp signal.  If it's jumpered to use the
preamps of the card and you're already using a pre-amp from the guitar that
seems to me like it would be bad ju-ju.  On the other hand, if you have a
line signal that is not going through the preamps, then you'll get very low
sound.

 

Check your 1010LT manual for directions on how to jumper it properly.

 

HTH,

Aaron

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://cm-mail.stanford.edu/pipermail/planetccrma/attachments/20051230/610ff602/attachment.html>