[PlanetCCRMA] was working with Live! card, not with 1010LT
Fernando Lopez-Lezcano
nando@ccrma.Stanford.EDU
Mon Aug 22 18:16:02 2005
On Mon, 2005-08-22 at 17:20, blindman jones wrote:
> Ok, I am stumped... I am running FC4 and had Hydrogen & Ardour working
> and jack ran well enough... although I never got it to work with
> realtime-lsm. I did get a lot of xruns and figured it was time to get
> a better card for multitracking, so I removed the SB Live! card and
> installed the M-Audio 1010LT card. Now, nothing works... Jack won't
> start at all or if it does it crashes right away. I have managed to
> get XMMS to play music through the DAC & DAC2.
>
> I have the kernel-2.6.12-0.21.rdt.rhfc4.ccrma installed and have not
> been able to activate realtime... /sbin/modprobe realtime gid=504
> produces FATAL: Module realtime not found. What am I doing wrong?
Nothing, 0.21.rdt is based on 2.6.12 and it incorporates a different way
of getting realtime privileges, it no longer needs to have the realtime
lsm loaded and in fact it is not included in those kernels.
If you have installed the patched version of pam included in the
repository you should be able to do realtime stuff with no problems.
> I hope someone can help point me in the right direction... TIA!!!
>
> here is what i am getting now when I start jack via qjackctl...
> 20:04:41.537 Patchbay deactivated.
> 20:04:41.855 Statistics reset.
> 20:04:41.986 MIDI connection graph change.
> 20:04:42.143 MIDI connection change.
> 20:04:42.344 MIDI connection change.
> 20:05:22.085 JACK is starting...
> 20:05:22.085 /usr/bin/jackd -v -dalsa -dhw:0 -r44100 -p512 -n2
> 20:05:22.091 JACK was started with PID=5414 (0x1526).
> getting driver descriptor from /usr/lib/jack/jack_dummy.so
> getting driver descriptor from /usr/lib/jack/jack_alsa.so
> getting driver descriptor from /usr/lib/jack/jack_oss.so
> jackd 0.100.1
> Copyright 2001-2005 Paul Davis and others.
> jackd comes with ABSOLUTELY NO WARRANTY
> This is free software, and you are welcome to redistribute it
> under certain conditions; see the file COPYING for details
> JACK compiled with System V SHM support.
> server `default' registered
> loading driver ..
> apparent rate = 44100
> creating alsa driver ... hw:0|hw:0|512|2|44100|0|0|nomon|swmeter|-|32bit
> control device hw:0
> configuring for 44100Hz, period = 512 frames, buffer = 2 periods
> nperiods = 2 for capture
> nperiods = 2 for playback
> 5414 waiting for signals
> registered builtin port type 32 bit float mono audio
> new client: alsa_pcm, id = 1 type 1 @ 0x805ba78 fd = -1
> new buffer size 512
> registered port alsa_pcm:capture_1, offset = 2048
> registered port alsa_pcm:capture_2, offset = 4096
> registered port alsa_pcm:capture_3, offset = 6144
> registered port alsa_pcm:capture_4, offset = 8192
> registered port alsa_pcm:capture_5, offset = 10240
> registered port alsa_pcm:capture_6, offset = 12288
> registered port alsa_pcm:capture_7, offset = 14336
> registered port alsa_pcm:capture_8, offset = 16384
> registered port alsa_pcm:capture_9, offset = 18432
> registered port alsa_pcm:capture_10, offset = 20480
> registered port alsa_pcm:capture_11, offset = 22528
> registered port alsa_pcm:capture_12, offset = 24576
> registered port alsa_pcm:playback_1, offset = 0
> registered port alsa_pcm:playback_2, offset = 0
> registered port alsa_pcm:playback_3, offset = 0
> registered port alsa_pcm:playback_4, offset = 0
> registered port alsa_pcm:playback_5, offset = 0
> registered port alsa_pcm:playback_6, offset = 0
> registered port alsa_pcm:playback_7, offset = 0
> registered port alsa_pcm:playback_8, offset = 0
> registered port alsa_pcm:playback_9, offset = 0
> registered port alsa_pcm:playback_10, offset = 0
> ++ jack_rechain_graph():
> client alsa_pcm: internal client, execution_order=0.
> -- jack_rechain_graph()
> 20:05:24.237 Server configuration saved to "/home/blindman/.jackdrc".
> 20:05:24.240 Statistics reset.
> 20:05:24.244 Client activated.
> 20:05:24.270 Audio connection change.
> 20:05:24.274 Audio connection graph change.
> new client: qjackctl-5408, id = 2 type 2 @ 0xb668c000 fd = 15
> ++ jack_rechain_graph():
> client alsa_pcm: internal client, execution_order=0.
> client qjackctl-5408: start_fd=5, execution_order=0.
> client qjackctl-5408: wait_fd=10, execution_order=1 (last client).
> -- jack_rechain_graph()
> ALSA: poll time out, polled for 17411673 usecs
> DRIVER NT: could not run driver cycle
I don't know too much but it would seem that somehow the card is not
generating interrupts? (see below on the output of cat /proc/interrupts)
I have not used the Midiman 1010LT myself...
What happens if you start envy24control? Do you see the internal
controls? Are they set to reasonable values? (ie: internal clock)
-- Fernando
> jack main caught signal 12
> 20:05:39.829 Shutdown notification.
> 20:05:39.831 Client deactivated.
> starting server engine shutdown
> freeing shared port segments
> stopping server thread
> last xrun delay: 0.000 usecs
> max delay reported by backend: 0.000 usecs
> freeing engine shared memory
> max usecs: 0.000, engine deleted
> no message buffer overruns
> cleaning up shared memory
> cleaning up files
> unregistering server `default'
> 20:05:39.837 JACK was stopped successfully.
> zombified - calling shutdown handler
>
> here is what I have installed from ccrma...
> alsa-driver-1.0.9b-1.rhfc4.ccrma
> alsa-firmware-1.0.9-1.rhfc4.ccrma
> alsa-oss-1.0.9-1.rhfc4.ccrma
> alsa-tools-1.0.9-1.rhfc4.ccrma
> alsa-utils-1.0.9rfa-1.rhfc4.ccrma
> ardour-0.9beta29-1.1.cvs.rhfc4.ccrma
> hydrogen-0.9.2-2.rhfc4.ccrma
> hydrogen-drumkits-0.9.2-2.rhfc4.ccrma
> imlib2-1.2.0-8.fc4.rhfc4.ccrma
> imlib2-devel-1.2.0-8.fc4.rhfc4.ccrma
> jack-audio-connection-kit-0.100.1-0.5.cvs.rhfc4.ccrma
> jack-audio-connection-kit-devel-0.100.1-0.5.cvs.rhfc4.ccrma
> jackmix-0.0.3-1.rhfc4.ccrma
> kernel-2.6.12-0.21.rdt.rhfc4.ccrma
> kernel-module-alsa-2.6.12-0.21.rdt.rhfc4.ccrma-1.0.9b-1.rhfc4.ccrma
> liblrdf-0.4.0-1.rhfc4.ccrma
> liblrdf-devel-0.4.0-1.rhfc4.ccrma
> planetccrma-core-edge-2005.07.10-1.rhfc4.ccrma
> potrace-1.7-1.rhfc4.ccrma
> qjackctl-0.2.17-1.rhfc4.ccrma
> raptor-1.4.2-1.rhfc4.ccrma
> raptor-devel-1.4.2-1.rhfc4.ccrma
> rtirq-20050620-1.rhfc4.ccrma
> swh-plugins-0.4.13-1.rhfc4.ccrma
> wxGTK2-2.4.2-12.rhfc4.ccrma
> wxGTK-2.4.2-12.rhfc4.ccrma
> wxGTK-common-2.4.2-12.rhfc4.ccrma
> wxGTK-gl-2.4.2-12.rhfc4.ccrma
> xmms-jack-0.13-2.rhfc4.ccrma
>
> Modules loaded...
> Module Size Used by
> snd_seq_midi 10912 0
> snd_ice1712 66372 3
> snd_ice17xx_ak4xxx 5120 1 snd_ice1712
> snd_ak4xxx_adda 7040 2 snd_ice1712,snd_ice17xx_ak4xxx
> snd_cs8427 11520 1 snd_ice1712
> snd_ac97_codec 83708 1 snd_ice1712
> snd_seq_dummy 4228 0
> snd_seq_oss 37888 0
> snd_seq_midi_event 7680 2 snd_seq_midi,snd_seq_oss
> snd_seq 60176 9
> snd_seq_midi,snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
> snd_pcm_oss 63776 0
> snd_mixer_oss 21376 1 snd_pcm_oss
> snd_pcm 106632 3 snd_ice1712,snd_ac97_codec,snd_pcm_oss
> snd_timer 28292 2 snd_seq,snd_pcm
> snd_page_alloc 11140 1 snd_pcm
> snd_i2c 6400 2 snd_ice1712,snd_cs8427
> snd_mpu401_uart 8448 1 snd_ice1712
> snd_rawmidi 27808 2 snd_seq_midi,snd_mpu401_uart
> snd_seq_device 9868 5
> snd_seq_midi,snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi
> snd 68612 26
> snd_seq_midi,snd_ice1712,snd_ice17xx_ak4xxx,snd_ak4xxx_adda,snd_cs8427,
> \
> snd_ac97_codec,snd_seq_dummy,snd_seq_oss,snd_seq_midi_event,snd_seq, \
> snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_i2c,snd_mpu401_uart, \
> snd_rawmidi,snd_seq_device
> soundcore 9824 1 snd
>
> /proc/interrupts
> CPU0
> 0: 8131214 IO-APIC-edge [.........N/ 0] timer
> 1: 4577 IO-APIC-edge [........../ 5] i8042
> 7: 3 IO-APIC-edge [..P......./ 0] parport0
> 8: 1 IO-APIC-edge [.........N/ 0] rtc
> 12: 185 IO-APIC-edge [........../ 74] i8042
> 14: 1849 IO-APIC-edge [........../ 0] ide0
> 15: 32577 IO-APIC-edge [........../ 0] ide1
> 16: 484787 IO-APIC-level [........../ 0] uhci_hcd:usb2,
> radeon@pci:0000:01:00.0
> 18: 0 IO-APIC-level [........../ 0] uhci_hcd:usb4
> 19: 234512 IO-APIC-level [........../ 0] uhci_hcd:usb3
> 20: 9427 IO-APIC-level [........../ 0] eth0
> 21: 0 IO-APIC-level [.........N/ 0] ICE1712
Hmmm, isn't the second number the number of interrupts?
> 22: 429320 IO-APIC-level [........../ 0] acpi, aic7xxx, ohci1394
> 23: 367965 IO-APIC-level [........../ 0] ehci_hcd:usb1
> NMI: 0
> LOC: 8132103
> ERR: 0
> MIS: 0