[PlanetCCRMA] Re: Problem with /usr/bin/jackstart

[Ron Pepper]

--- Mark Knecht <markknecht@gmail.com> wrote:

> On 8/4/05, Ron Pepper <feffer777@yahoo.com> wrote:
> > 
> > --- Mark Knecht <markknecht@gmail.com> wrote:
> > 
> > > NOTE: Thread hijack in progress....
> > 
> > Sorry, I shouldn't have done it that way. I changed the subject
> for
> > this reply.
> > >
> > > Ron - what kernel are you running? Post back the output of
> uname -a
> > 
> > [rp@localhost ~]$ uname -a
> > Linux localhost 2.6.11-1.27_FC3 #1 Tue May 17 20:27:37 EDT 2005
> i686
> > i686 i386 G NU/Linux
> > 
> > Ron
> 
> You are not running the PlanetCCRMA kernel. This is the FC kernel.
> Check that your grub.conf file was properly modified
> (/boot/grub/grub.conf) and then reboot choosing the PlanetCCRMA
> kernel. Then try again.
> 
> Good luck,
> Mark

Tried again with CCRMA kernal, albeit a little older one. Still no
go. Any ideas?

[rp@localhost ~]$ jackd -R -d alsa -d hw
jackd 0.99.36
Copyright 2001-2003 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details

JACK compiled with System V SHM support.
cannot lock down memory for jackd (Cannot allocate memory)
loading driver ..
creating alsa driver ... hw|hw|1024|2|48000|0|0|nomon|swmeter|-|32bit
configuring for 48000Hz, period = 1024 frames, buffer = 2 periods
Couldn't open hw for 32bit samples trying 24bit instead
Couldn't open hw for 24bit samples trying 16bit instead
nperiods = 2 for capture
Couldn't open hw for 32bit samples trying 24bit instead
Couldn't open hw for 24bit samples trying 16bit instead
nperiods = 2 for playback
JACK: unable to mlock() port buffers: Cannot allocate memory
jack_create_thread: error -1 switching current thread to rt for
inheritance: Unknown error 4294967295
cannot start watchdog thread
cannot load driver module alsa
Segmentation fault
[rp@localhost ~]$ uname -a
Linux localhost 2.6.10-0.4.rdt.rhfc3.ccrma #1 Wed Jan 26 16:20:30 EST
2005 i686 i686 i386 GNU/Linux

Thanks,
Ron 



		
____________________________________________________
Start your day with Yahoo! - make it your home page 
http://www.yahoo.com/r/hs