[PlanetCCRMA] Re: PlanetCCRMA digest, Vol 1 #1240 - 3 msgs

[Randy Winchester]

I'm sorry to say that I missed Flash Love's original message, but I've 
been using EMU10K driver with an Audigy 2 ZS Platinum Pro and FC3.  I 
don't recall having to do much to set it up other than running alsaconf 
and then setting levels with alsamixer.  I'm using a pretty much stock 
FC3 from the original FC3 ISOs, as my sound box isn't on the network, 
and the Planet ISO from sometime in March.  Drop me a line directly and 
we can compare notes.

>Date: Tue, 26 Apr 2005 07:22:15 -0700
>From: Mark Knecht <markknecht at gmail.com>
>Reply-To: Mark Knecht <markknecht at gmail.com>
>To: flashl at cox.net
>Subject: Re: [PlanetCCRMA] No Sound using EMU10K driver w/SB Audigy Z2
>Cc: planetccrma at ccrma.Stanford.EDU
>
>On 4/26/05, Flash Love <flashl at cox.net> wrote:
>  
>
>>Thanks for your reply. Yes, I had done the easy one using alsamixer. Within
>>alsamixer the PCM devices appear, however, if I use QaMix or Jack the pcm
>>devices do not appear. This is where I am stumped. In the last install, alsa
>>configured all of the devices for the card, this time it will not. For
>>instance, when I use QaMix, there are no Playback devices.
>>
>>Flash
>>
>>    
>>
>Sorry. The whole experience seems quite foreign. What does the Alsa
>site say about this specific version of the SB? Have others been
>successful>
>
>- Mark
>  
>
==============================================================
Randy Winchester <randy at mit.edu>
MIT 9-050, 77 Massachusetts Avenue, Cambridge, MA 02139
==============================================================
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://cm-mail.stanford.edu/pipermail/planetccrma/attachments/20050426/63258909/attachment.html>