[PlanetCCRMA] sblive

Fernando Pablo Lopez-Lezcano nando@ccrma.Stanford.EDU
Sat Oct 9 23:23:01 2004

On Sat, 2004-10-09 at 12:01, yves.beeken wrote:
> Hello,
> A few questions after installing and configuring the SBLive card:
> 1. What are the setup parameter for Qjackctl?

There's nothing specific to the sblive, I think. I seem to remember that
the capture buffer has to be 512 or more (with the current alsa driver),
and that means the latency is not that good. If you set it up for
playback only then you can go lower. 

> 2. Is there a way to enable the front panel (Live!Drive II) under Linux. I am 
> searching the Web for a while but didn't find anyting. 

Look for the parameters for the snd-emu10k1 driver, in particular for
the extin/extout pair...

-- Fernando