[PlanetCCRMA] Newbie trying to set up Quattro

Doug Regehr dregehr@rim.com
Tue Mar 16 10:19:01 2004

Thanks Mark, here is my modules.conf:

alias eth0 8139too
alias usb-controller usb-ohci
alias usb-controller1 ehci-hcd
alias ieee1394-controller ohci1394
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF verion 0.9.0 ---
alias char-major-116 snd
alias snd-card-0 snd-intel8x0
alias char-major-14 soundcore
alias sound-slot-0 snd-card-0
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
options snd major=116 cards_limit=3 
options snd-intel8x0 index=0 
# --- END: Generated by ALSACONF, do not edit. ---
# -- Keep modules from being autocleaned
add options -k snd-card-0
alias /dev/ttySHSF[0-9]* /dev/ttySHSF
alias /dev/modem /dev/ttySHSF
alias char-major-240 /dev/ttySHSF
alias /dev/cuaHSF[0-9]* /dev/ttySHSF
alias char-major-241 /dev/ttySHSF
options hsfserial serialmajor=240 calloutmajor=241 
alias char-major-242 hsfosspec
alias /dev/hsfdiag* /dev/hsfdiag
alias /dev/hsfdiag* /dev/hsfdiag
alias char-major-243 /dev/hsfdiag
options hsfosspec dcpmajor=242 diagmajor=243 
probeall /dev/ttySHSF hsfpcibasic2 hsfmc97ich hsfmc97via hsfmc97ali
probeall hsfserial hsfpcibasic2 hsfmc97ich hsfmc97via hsfmc97ali
alias /dev/ttySHSF[0-9]* /dev/ttySHSF
alias /dev/cuaHSF[0-9]* /dev/ttySHSF

> -----Original Message-----
> From: Mark Knecht [mailto:markknecht@comcast.net]
> Sent: March 14, 2004 11:24 PM
> To: Doug Regehr
> Cc: PlanetCCRMA
> Subject: Re: [PlanetCCRMA] Newbie trying to set up Quattro
> On Sun, 2004-03-14 at 20:08, Doug Regehr wrote:
> > Hello all,
> > 
> > I have just installed the planet on my Shuttle XPC SS51G, 
> and now I'm trying to get my M-Audio Quattro working.  I've 
> added Patrick Shirkey's  .asoundrc file to my home directory, 
> as recommended by the ALSA website.  However, when I try to 
> play a wave file through the Quattro:
> > 
> > [dregehr@atlantis dregehr]$ aplay -D quattro1 foo.wav
> > 
> > ...the sound comes out of the Shuttle's integrated audio!!! 
>  (The Quattro is not connected to any speakers, but it is 
> turned on, and it shows up in /proc/asound/cards). Does 
> anyone know what's going on here?
> > 
> > Thanks in advance,
> > 
> > Doug Regehr
> It's probably related to what index number each sound device is given.
> Post back your modules.conf file showing how you set up the 
> drivers for
> each device. I'd guess the Shuttle's sound chip is device 0 and you're
> command above is somehow mapping to device 0.
> Good luck,
> Mark