[PlanetCCRMA] back again, FC2

[Aaron]

Hi all,

I am trying Fedora again so I am back with the Planet.

I just installed the FC2 kernel etc.

When I run alsaconf I get the following errors:
------------------------------------------------------------
Starting sequencer FATAL: Error inserting snd_seq
(/lib/modules/2.6.7-1.437.1.ll
.rhfc2.ccrmasmp/updates/acore/seq/snd-seq.ko): Unknown symbol in module,
or unkn own parameter (see dmesg)
                                                           [FAILED]
Starting sequencer driver snd-emu10k1-synth WARNING: Error inserting
snd_seq (/l
ib/modules/2.6.7-1.437.1.ll.rhfc2.ccrmasmp/updates/acore/seq/snd-seq.ko): Unknow n symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_seq_midi_emul
(/lib/modules/2.6.7-1.437.1.ll.rhfc2.
ccrmasmp/updates/acore/seq/snd-seq-midi-emul.ko): Unknown symbol in
module, or u nknown parameter (see dmesg)
WARNING: Error inserting snd_seq_midi_event
(/lib/modules/2.6.7-1.437.1.ll.rhfc2
.ccrmasmp/updates/acore/seq/snd-seq-midi-event.ko): Unknown symbol in
module, or  unknown parameter (see dmesg)
WARNING: Error inserting snd_seq_virmidi
(/lib/modules/2.6.7-1.437.1.ll.rhfc2.cc
rmasmp/updates/acore/seq/snd-seq-virmidi.ko): Unknown symbol in module,
or unkno wn parameter (see dmesg)
WARNING: Error inserting snd_emux_synth
(/lib/modules/2.6.7-1.437.1.ll.rhfc2.ccr
masmp/updates/synth/emux/snd-emux-synth.ko): Unknown symbol in module,
or unknow n parameter (see dmesg)
FATAL: Error inserting snd_emu10k1_synth
(/lib/modules/2.6.7-1.437.1.ll.rhfc2.cc
rmasmp/updates/pci/emu10k1/snd-emu10k1-synth.ko): Unknown symbol in
module, or u nknown parameter (see dmesg)
                                                           [FAILED]
Starting sequencer driver snd-seq-midi WARNING: Error inserting snd_seq
(/lib/mo
dules/2.6.7-1.437.1.ll.rhfc2.ccrmasmp/updates/acore/seq/snd-seq.ko):
Unknown sym bol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_seq_midi_event
(/lib/modules/2.6.7-1.437.1.ll.rhfc2
.ccrmasmp/updates/acore/seq/snd-seq-midi-event.ko): Unknown symbol in
module, or  unknown parameter (see dmesg)
FATAL: Error inserting snd_seq_midi
(/lib/modules/2.6.7-1.437.1.ll.rhfc2.ccrmasm
p/updates/acore/seq/snd-seq-midi.ko): Unknown symbol in module, or
unknown param eter (see dmesg)
                                                           [FAILED]
Restoring sound driver settings /usr/sbin/alsactl: set_control:797:
warning: num id mismatch (68/69) for control #68
/usr/sbin/alsactl: set_control:797: warning: numid mismatch (70/71) for
control #70
/usr/sbin/alsactl: set_control:805: warning: name mismatch (3D Control
Sigmatel - Depth/Mic Select) for control #71
/usr/sbin/alsactl: set_control:805: warning: name mismatch (3D Control
Sigmatel - Rear Depth/3D Control Sigmatel - Depth) for control #72
/usr/sbin/alsactl: set_control:805: warning: name mismatch (Sigmatel
4-Speaker S tereo Playback Switch/3D Control Sigmatel - Rear Depth) for
control #73
/usr/sbin/alsactl: set_control:892: bad control.73.value type
                                                           [FAILED]
Setting default volumes...
 
===============================================================================
                                                                                
 Now ALSA is ready to use.
 For adjustment of volumes, use your favorite mixer.
                                                                                
 Have a lot of fun!
---------------------------------------------------------                                                                           
Any idea what is wrong, I updated the modutils as suggested.

Thanks
Aaron