[CM] Re: Cmdist digest, Vol 1 #1065 - 4 msgs

[junky2@mail.bg]

Hello,
I have problems play audio in snd, here is the message

;status of default
hw_params status of default
ACCESS:  RW_INTERLEAVED
FORMAT:  S16_LE
SUBFORMAT:  STD
SAMPLE_BITS: 16
FRAME_BITS: 32
CHANNELS: 2
RATE: (47998 47999)
PERIOD_TIME: (21333 21334)
PERIOD_SIZE: 1024
PERIOD_BYTES: 4096
PERIODS: 3
BUFFER_TIME: (63998 64003)
BUFFER_SIZE: 3072
BUFFER_BYTES: 12288
TICK_TIME: ALL
sw_params status of default
start_mode: DATA
xrun_mode: STOP
tstamp_mode: NONE
period_step: 0
sleep_min: 0
avail_min: 0
xfer_align: 0
silence_threshold: 0
silence_size: 0
boundary: 0
;Invalid argument: cannot set hardware parameters for
default

can't play : Invalid argument: cannot set hardware
parameters for default
-------
lspci | grep -i audio
Multimedia audio controller: nVidia Corporation CK804 AC'97
Audio Controller (rev a2)
my card uses intel8x0 driver
00-02: Intel ICH - IEC958 : NVidia CK804 - IEC958 : playback
1
00-01: Intel ICH - MIC ADC : NVidia CK804 - MIC ADC :
capture 1
00-00: Intel ICH : NVidia CK804 : playback 1 : capture 1
--------------------
aplay test.wav
Playing WAVE 'test.wav' : Signed 16 bit Little Endian, Rate
44100 Hz, Stereo
but
aplay --device=hw:0 test.wav
Warning: rate is not accurate (requested = 44100Hz, got =
48000Hz)
         please, try the plug plugin
aplay --device=plughw:0 test.wav
Playing WAVE 'test.wav' : Signed 16 bit Little Endian, Rate
44100 Hz, Stereo

MUS_ALSA_DEVICE=plughw:0 snd 'test.wav'
hw:0: could not set rate to exactly 44100, set to 48000
instead
MUS_ALSA_DEVICE=hw:0 snd 'test.wav'
hw:0: could not set rate to exactly 44100, set to 48000
instead

what should I do to get snd work with alsa? Please help!

Sambutcha

-----------------------------

КУРС ПО Е-БИЗНЕС (част 1) - 25 ноември, гр. София
- Представете си как би могъл да изглежда животът ви след този ден ...
- Запазете своето място сега, заплатете до три дни
- Започнете свой бизнес до края на м. декември
http://lifeconsult.info?mbg_eml